12Additional information
•If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from the antenna input terminal of the A/V equipment.
Scope of operation
Use of this equipment is limited to home use. (Transmission distances may be reduced depending on communication environments.)
In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped:
•In reinforced concrete buildings or homes made of metallic structural members.
•Near large metallic furniture.
•In a crowd of people or near a building or obstacle.
•If you live in a heavily populated residential area (apartment, townhouse, etc.) and if your neighbor's microwave is placed near your system, you may experience radio wave interference or no sound from the speaker. If this occurs, move your unit to a different place. When the microwave is not in use, there will be no radio wave interference.
For safety in operation
Do not use the system in the proximity of electronic equipment that requires high- accuracy control or handling of very
•Hearing aids, cardiac pacemakers, other electrical medical equipment, fire alarms, automatic doors, and other automated control equipment.
The system may affect the electronic equipment, causing malfunction or accident.
80
•If you use a pacemaker or other electrical medical equipment, consult the manufacturer or dealer to check the effects of radio waves on it.
Do not use the system in places where its use is prohibited, for example near aircraft equipment and in hospitals.
The system may affect electronic equipment or electrical medical equipment, causing an accident. Follow the instructions given by the aircraft company or medical institution.
•We do not assume any liability for the damages incurred due to improper use of the product by the user or third party, malfunction during use, other troubles or use of the product, unless indemnity for damages is admitted by the law.
Static electricity
Static electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then re- plugging it in will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center.
En