Buttons
VCR Function Buttons
(continued)
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns off VCR when remote is set to control the VCR.
REW (Rewind)
Rewinds the tape when the VCR
is stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX, ZERO, and BLANK search menus on TV.
Advances tape 60 seconds during
playback.
STOP
Stops the normal lun__tion_ such as record, playback, rewind, fast forward, and pause of the VCR.
TRACKING Up or Down
Lets you manually reduce the streaks that may appear on the picture during play, slow, or pause.
Reduces picture "jitter" during
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select another. Press PREV OH to switch between the two channels.
REC
Starts VCR recording.
Used for express recording. See page 30.
SLOW - / +
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed (SP, LP, SLP).
TV.VCR
Switches the picture signal so
that it either comes from the VCR or the TV channel. See page 12.
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with the TV.
CHAN (Channel) Up or Down
Selects next higher or lower channel in the TV's channel
memory when remote is set to control a TV.
CLEAR
Removes menus from the screen.
DISPLAY
Shows the status displays on the screen.
Removes displays from the screen.
POWER
Turns off a compatible TV when remote is set to control that TV.
Used with TV button to turn on a compatible TV that the remote
has been programmed to control. See page 17.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
To select a cable channel over 99, press and hold 1 until
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select another. Press PREV GH to switch between the two channels.
VOL (Volume) Up or Down Raises and lowers sound.
Cable Box or RCA DSS ® Receiver Function Buttons
Press the GABLE button to set remote to control a compatible cable box or RCA satellite receiver. Some buttons may not work with the cable box or receiver.
CHAN | (Channel) | Up or Down | Numbers | (0 through 9 ) |
Selects | next higher | or lower | Used to | select a channel. |
channel in the cable box's or |
|
| ||
satellite | receiver's | channel |
|
|
memory when remote is set to control it.
POWER
Turns off a compatible cable box or satellite receiver when remote
is set to control it.
15