Startup
5. Place channels in the VCR's memory.
The first time you turn on the VCR or after a power
interruption, the VCR displays a message on the TV
screen prompting you to perform an AUTO CHANNEL SEARCH. If the message does not appear, go to step A below. If the message appears, follow the directions on the screen.
Wait until the channel numbers stop changing. This takes about one to two minutes. Then, the TV tunes to the lowest channel found. Pressing CHAN up or down selects only the active channels.
If you ever need to manually SETUP CHANNELS on the VCR because you change cable or antenna signals:
A. Press MENUopROG to display the VCR MAIN
MENU on the TV screen. If this menu does not
appear:
•Make sure TV is tuned to the same channel as the 3 CH. 4 switch on the VCR or the TV's video input (refer to the TV's manual).
•Press VCR1, then press MENU.PROG again.
. If you are using a basic hookup, the VCR indicator should be on. If it is not on, press TV°VCR to turn it on.
•Check the connections.
B. Press 4 to display the CHANNELS menu.
C.Press 1 to begin AUTO CHANNEL SEARCH.
The VCR automatically selects CABLE (cable TV) or ANTENNA. If you need to change the setting manually, press 3.
6.Add or remove channels from the VCR's memory.
You can add or remove channels if sorne of the
channels are not active, have weak signals, or if you do not want to watch them.
We recommend channels be placed in memory using the AUTO CHANNEL SEARCH feature described in step 5 before adding or removing channels. Channels 2- 13, L1 and L2 are present at the factory.
A. Press VCR1.
B. Press
MAIN MENU on the TV screen.
C.Press 4 to display the CHANNELS menu.
D.Press 2 to display the ADD/REMOVE CHANNEL menu.
E.Follow the directions on the screen.
F.You can add or remove more channels by entering channel numbers or using CHAN up or down.
AUTO CHANNEL SEARCH
CONNECT ANTENNA CABLE...
THEN PRESS CH UP
VCR MAIN MENU
VCR PLUS+
TIMER RECORDINGS
SET CLOCK
CHANNELS
CHANNELS
I AUTO CHANNEL SEARCH
2 ADD/REMOVE CHANNELS
3 SIGNAL TYPE: CABLE
4 | VCR | PLUS+ | CHANNEL | LIST | |
5 | CABLE/DSS | BOX | SETUP |
| |
0EXIT
VCR MAIN MENU
VCR PLUS+
TIMER RECORDINGS
SET CLOCK
CHANNELS
CHANNELS[
AUTO CHANNEL SEARCH
ADD/RENOVE CHANNELS
ADD/REMOVE CHANNEL
CHANNEL 03
IS PRESENTLY ADDED
PRESS CLEAR TO REMOVE
PRESS MENU TO EXIT
11