If the Auto Play feature isset to ON, the tape automatically begins playback (if the safety tab on the cassette is removed).
•Press FWD or REV to position the tape.
•Press PLAY (if necessary) to begin tape play.
•Press PAUSE for stop action.
•PressTRACKING up or down to remove any streaks from the picture, if necessary.
•Press STOP to stop playback.
AUTOMATIC REWI N D
The VCR automatically rewinds the tape if it reaches the end of the tape during playback. While rewinding, you can press POWER on the VCR (OFF on the remote) and the VCR will turn off after rewinding.
TAPE EJECT
Press EJECTon the VCR when it is stopped to eject the tape.
RECORDING
If you want to record something that you're watching, you can use basic recording.
1.Set the tape speed by pressing the SPEED button on the remote (see margin note for information about tape speed settings).
2.Press the RECORD button to begin recording.
3.Press STOP to stop recording.
If you just want to pause the recording for a short time (during a commercial, for instance), press PAUSE instead of STOP.
Pause
If you pause, the VCR automatically switches from pause to stop after a
Ifew minutes to reduce tape wear. •
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but fewer programs can be recorded on the tape. Special effects such as pause, slow motion, picture search, and frame advance work well when you play back tapes recorded in this speed.
LP (Long Play)
Your VCR is capable of playing back tapes recorded in LP. You cannot record in the LP speed.
SLP (Super Long Play)
Gives three times the recording time of tapes recorded in SP. Special effects such as pause, slow motion, picture search, and frame advance work well when you play back tapes recorded in this speed.
Reco_ing Time
Cassette SP SLP
25