RCA VR628HF manual Tracking, Time Counter, GO-TO Search

GO-TO SEARCH

The Go-To search feature enables the VCR to quickly locate a counter reading anywhere on the tape. When the VCR locates the counter reading, it will begin playback.

1.Press STOR

. Press SEARCH on the remote until the GO-TO SEARCH menu appears on the screen.

. Press number buttons to enter the hour(s) and/or minutes of the counter reading you want the VCR to "go to". Press CLEAR on the remote to correct an entry.

. Press FORWARD (FWD) to search forward or REVERSE(REV) to search in reverse.

5.Press STOP to stop Go-To searching.

TRACKING

Your VCR has automatic tracking which removes the s{reaks or snow from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a different VCR. Just use the TRACKING buttons to remove the streaks or snow. You can also use tracking when you pause a tape to reduce jittering of the picture.

When you manually adjust the picture, automatic tracking is turned off. To turn automatic tracking back on, press both TRACKING buttons on the VCR at the same time, or eject the tape and re-insert it.

Tracking only effects playback--not recording.

TIME COUNTER

The time counter shows the actual time it takes to record a program or play back a segment of a recorded tape. It helps locate the beginning or end of programs you taped. The time counter resets to 0:00:00 whenever the tape is ejected from the VCR.

GOITO SEARCH

Current tape counter is

2:17:25

Press REV or FWD

to go to -:--:00

Press SEARCH to exit

GO-TO SEARCH

Searching for

0:00:00...

Press SEARCH to exit

44