RCA VR628HF manual Press MENUmPROG to enter the VCR PlusCode number

. Enter the VCR PlusCode shown in your local television programming guide.

VCR PLUS+

Enter PlusCode Number

(from TV listing)

12876

Press CLEAR to correct

Press MENU when done

4.Press MENUmPROG to enter the VCR PlusCode number.

How often should this

program record?

1 One Time

2 Daily (every day)

3 Weekdays (M-F)

4 Weekly (Once per week)

0Cancel

. Indicate how often you want the program to be recorded.

Program 1 (One Time)

Channel		03	CABLE
Start	Time	08:00	PM
End	Time	09:30	PM
Start	Date	10/24/97		Fri
Tape	Speed	SLP
Press	CLEAR	to	correct
Press	MENU	to	save

. Change the speed with the SPEEDbutton on the remote or the program end time with the CLEAR button on the remote (if necessary).

Changing the end time comes in handy when you are recording a program such as a sporting event that may exceed the scheduled broadcast time.

7.Press MENUmpROG to save the program.

Program 1 has been saved

Remember		to	insert	a
recordable		tape		and
turn	the	VCR	off	before
the	program		start	time.

Press MENU to continue

VCR Plus+ Recording

Clock must be set correctly.

Insert a tape with the safety tab in place and enough tape to record the program.

The output of your cable box appears in the Channel item of the timer recording menu if you've set up the VCR for a cable box for all channels.

The correct channel and start & stop time will also appear if the VCR is set up to control the cable box.

UNRECOGNIZED NUMBER... PLEASE RE-ENTER appears when the VCR does not recognize the PlusCode number. PROGRAMS OVERLAP appears if you have entered two programs where the times; overlap.

The TIMER indicator appears in the display when you turn off the VCR and a timer recording has been set. It flashes if there is no tape in the VCR.

For a cable box the VCR can control, turn it or, before the recording is to begin.

For a cable box the VCR cannot control, turn it on and tune it to the channel you want to record before the recording is to begin.

31