RECORDING
5.Enter the data for the program with the number buttons.
The data includes the channel number (press INPUT to select the line input), start time including AM or PM, and end time. The start date is automatically entered based on the VCR clock. The date and/or speed can be changed when flashing.
6.Review the information to make sure it is correct, and then press MENU to save.
Program 1 (One Time)
Channel | 03 Cable | |
Start Time | 08:00 | PM |
End Time | 09:30 | PM |
Start Date | 11/18/97 TUE |
Tape Speed SLP
1=SP 2=SLP Press CLEAR to correct Press MENU to save
Program 1 has been saved
Remember to insert a recordable tape and turn the VCR off before the program start time.
Press MENU to continue
TIMER RECORDING WITH VCR PLUS+
You can use VCR Plus+ to simplify timer programming if you have cable TV and don’t receive all channels through a cable box or if you receive your TV signal
Setting Up the Channel List
If you did not set up the VCR Plus+ channel list, you can do it now.
1.Display the CHANNELS menu from the VCR MAIN MENU.
2.Display the VCR Plus+ Channel List menu.
3.Go to Setting Up Your VCR if you need more information on setting up your VCR Plus+ channel list.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3Time
4Channels
5Preferences
6LanguageCHANNELS
1Auto Channel Search
02ExitAdd/Remove Channels
3Signal Type: CABLE
4VCR Plus+ Channel List
VCR+ Channel My Channel | ||
| 5 | 46 |
0 Exit | 4 | |
| 3 | |
| 2 | |
| 1 | |
Use CH+/- to select | ||
Press | ||
Press | MENU to save | |
|
|
|
Using VCR Plus+
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3Time
4Channels
5Preferences
6Language
0 Exit
If you receive all channels through your cable box on Channel 3 or 4, you must use the regular Timer Recording method to record programs.
| VCR Plus+ and PlusCode are registered trademarks |
24 | of Gemstar Development Corporation. |
|