Getting started | 04 |
6 Use the (cursor up/down) buttons to select ‘Auto’ or ‘Manual’ clock setting, then press ENTER.
Clock
Auto | Date |
Manual | Time |
| Clock Set CH |
|
|
•Auto clock setting
Some TV channels broadcast time signals together with the program. This recorder can use these signals to set the clock automatically.
Use the (cursor left/right) buttons to set ‘Clock Set CH‘ to the channel preset number that broadcasts a time signal, then move the cursor down to ‘Start’ and press ENTER.
Auto
Auto | Date | - - | / - |
Manual | Time | - - | : - - AM |
| Clock Set CH |
| 0 0 2 |
|
|
| Start |
|
|
|
|
The recorder takes a short while to set the time. After you see that the time has been set, select Next to proceed.
Auto
Auto | Date | 01 | / 01 / 2005 SAT |
Manual | Time | 12 | : 00 AM |
| Clock Set CH |
| 0 0 2 |
|
|
| Start |
|
|
| Next |
|
|
|
|
If the time could not be set automatically, press RETURN to go back to the previous screen and select Manual.
•Manual clock setting
If no stations in your area are broadcasting time signals, you can set the clock manually.
Use the | (cursor left/right) buttons to set | ||
your time zone. |
|
| |
Manual |
|
|
|
Auto | Date | 01 | / 01 / 2005 SAT |
Manual | Time | 12 | : 00 AM |
| Time Zone |
| USA |
|
|
| Alaska |
| D.S.T. |
| Off |
Press (cursor down) then use the (cursor left/right) buttons to set D.S.T. to On or Off, then press ENTER.
Select On if you are currently using daylight saving time.
Set the current date and time.
Manual
Auto | Date | 01 | / 01 | / 2005 SAT |
Manual | Time | 12 | : 00 | AM |
| Time Zone |
| USA |
|
|
|
| Alaska | |
| D.S.T. |
| Off |
|
|
|
|
|
|
• Use the | (cursor up/down) buttons to change |
the value in the highlighted field. | |
• Use the | (cursor left/right) buttons to move |
from one field to another.
• Press ENTER to finish setting the time.
7 That’s it! Press ENTER to finish setting up.
Setup Navigator
Setup is complete!
Enjoy using your DVD recorder!
Finish Setup
Other settings you can make
After setting up using the Setup Navigator, you should be ready to start enjoying your DVD recorder. It’s possible, however, that you may want to make a couple of additional settings, depending on how the recorder is set up for TV broadcasts.
•Manual channel setting – This setting lets you skip channels where there is no station, as well as manually tune to stations. See Manual CH Setup on page 47.
•VCR Plus+ channel setting – This setting lets you assign guide channels to ensure that the VCR Plus+ programming system works correctly. See Guide CH Setup on page 47.
English
21
En