Pioneer DVR-233-S, DVR-231-AV, DVR-231-S manual Manual CH Setup, Guide CH Setup, OSD Language

The Initial Setup menu 08

Note

•If you want to cancel before tuning has finished, press ENTER.

•You can manually tune and skip blank channels using the Manual CH Setting, below.

Manual CH Setup

• Default setting: n/a

Tuner

Auto CH Setup	Channel
Manual CH Setup	Skip
Guide CH Setup	AFT

From the manual channel setup screen you can manually fine tune channels and set channels to skip.

The skip function lets you skip channels where there is no station so that as you change channels using the CHANNEL +/– buttons or the number buttons, you only change to channels that have a station.

1Select ‘Manual CH Setup’ to display the manual channel setup screen.

Manual CH Setup

Auto CH Setup	Channel	002
Manual CH Setup	Skip	Off
Guide CH Setup	AFT	On

• Use the	buttons to change the guide channel
for setting.

•If you want to skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•If you want to manually tune the displayed channel, change the AFT (Auto Fine Tuning) setting to Off, then move down to Level to manually tune to a station.

Manual CH Setup

Auto CH Setup	Channel	002
Manual CH Setup	Skip		Off
Guide CH Setup	AFT		Off
	Level	+32

2 To return to the Initial Setup menu, press ENTER.

Guide CH Setup

• Default setting: n/a

Guide channels are used by the VCR Plus+ system so that the channel number specified in the VCR Plus+ programming numbers can be guaranteed to correspond to the correct station.

1 Select ‘Guide CH Setup’, then ‘Guide CH’.

Tuner

Auto CH Setup	Guide - CH
Manual CH Setup
Guide CH Setup

2Assign channel numbers to the guide channels as necessary.

Look in your TV guide to see which channel numbers should be assigned to which guide channels.

Guide CH Setup

Auto CH Setup	Guide - CH			1/20
Manual CH Setup	1	0 0 6	6	- - - -
Guide CH Setup	2	- - - -	7	- - - -
	3	- - - -	8	- - - -
	4	- - - -	9	- - - -
	5	- - - -	10	- - - -

• Use the	buttons to change the guide channel
for setting.
• Use the	buttons to change the channel
number.

•Use the PREV / NEXT button to display the previous/ next 10 guide channels.

3To return to the previous screen, press ENTER or

RETURN.

OSD Language

•Default setting: English

Basic

Basic	Clock
Disc	Tuner
Video	OSD Language
Audio	Display
Recording	Remote Control
Playback	Setup Navigator

This sets the language of the on-screen menus and displays.

English

47

En