Pioneer DVR-320 Getting started Making your first recording, Using the built-in TV tuner

Page 28

04Getting started

Making your first recording

This quick guide shows you how to make a basic recording of a TV program to a recordable DVD.

Recording is covered in much more detail in chapter 6 (Recording).

STANDBY/ON

OPEN/CLOSE

CHANNEL

PLAY

STOP

REC STOPREC

DVD RECORDER

1If they aren’t already on, switch on your TV and this recorder.

Press STANDBY/ON to switch on.

•Make sure that the video input on your TV is set to this recorder.

2 Press OPEN/CLOSE to open the disc tray.

3Load a blank DVD-R or DVD-RW disc with the label side face-up, using the disc guide to align the disc.

•When you load a new, blank DVD-RW disc, the recorder will take a moment to initialize it for recording.

28

4Use the CHANNEL +/– buttons to select the TV channel you want to record from.

•You can also use the +/– buttons on the front panel if the recorder is stopped.

•Channel presets are numbered 1–99.

•If the recorder is connected to your TV using a SCART cable and your TV supports Direct Recording, it’s possible to quickly start recording whatever channel your TV is tuned to. See Direct recording from TV on page 47 for detailed instructions.

5 Press REC to start recording.

•By default, the recording will be in SP (standard play) mode, which will give you around two hours of recording from a blank DVD disc.

• You can pause recording by pressing PAUSE. Press REC or PAUSE again to restart recording.

6When you want to stop recording, press

STOP REC.

Playing back your recording

The TV program you just recorded should be on the DVD disc as a single title with one or more chapters.

• Press PLAY to start playback.

If you want to stop playback before the end of the recording, press STOP.

Using the built-in TV tuner

Changing TV channels

There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.

CHANNEL

ENTER

•CHANNEL +/– buttons on the remote

•Number buttons on the remote – For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4, ENTER.

•+/– buttons on the front panel

En

Page 27 Page 29
Image 28
Page 27 Page 29
Contents DVR-220DVR-320 LASERPRODUCTCLASS1 POWER-CORD Caution Operating EnvironmentContents Resetting the recorder Setting up the remote to control your TVAdditional information IndexBefore you start FeaturesBefore you start Chapter Before you start Using the remote control Putting the batteries in the remote controlBefore you start What’s in the box General disc compatibility DVD-R/RW compatibilityCD-R/RW compatibility Compressed audio compatibilityJpeg file compatibility WMA Windows Media Audio compatibilityPC-created disc compatibility Original Connecting up Connecting up ChapterRear panel connections Front panel connectionsConnecting up Extra features for use with compatible TVs Connecting up Easy connections Connecting up Using other types of audio/video output Connect the Video Output jack to a video input on your TVThis enables you to watch and record TV channels This enables you to watch discsThis enables you to record scrambled TV channels Connect RF antenna cables as shownConnecting up Connecting an external decoder box Scart AV Connector Connecting up Connecting to an AV amplifier/receiver This enables you to listen to multichannel surround soundConnecting up Connecting other AV sources PluggingControls and displays Controls and displays ChapterFront panel STANDBY/ONControls and displays Display Controls and displays Remote control AudioSubtitle AngleControls and displays Switching on and setting up Getting startedGetting started Chapter EnterGetting started Other settings you can make Select the TV screen type, ‘Standard 43’ or ‘Wide 169’Connected, or Not Connected, then press Enter Digital, Dolby Digital, DTS or PCM only, then pressUsing the built-in TV tuner Getting started Making your first recordingPlaying back your recording Changing TV channelsSwitching between TV and DVD Basic playbackChanging audio channels NicamPress STANDBY/ON to switch on Playing DVD discsPress OPEN/CLOSE to open the disc tray Load a disc To stop playback, press StopPlaying CDs and WMA/MP3 discs Playing Video CD/Super VCDsUsing the Home Menu Displaying disc information on- screenStop display UsePlay display Recording displayRecording mode Using the Disc Navigator to browse the contents of a disc PlaybackPlayback Chapter IntroductionUsing the Disc Navigator with recordable discs PlaybackChanging the thumbnail picture for a title Select ‘Play’ from the menu optionsNavigating discs Scanning discsScan 1 Scan 2 Scan 3 Scan Scan Scan 2 ScanPlaying in slow motion Frame advance/frame reverseSlow 1/2 PressPlayback Play Mode menu Search ModePlay Mode RepeatRepeat play Program playOther Program play functions Repeat to build up a program listSwitching DVD soundtracks Playback Displaying and switching subtitlesClear Playback Switching audio channels Switching camera anglesTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleRecording Recording ChapterAbout DVD recording Recording time and picture qualityRecording Restrictions on video recording Setting the picture quality/recording timeRecording equipment and copyright Recording Basic recording from the TV Load a recordable discFront panel display shows the channel number Use the Audio button to select the audio channel to recordRecording Setting a timer recordingDirect recording from TV Easy Timer Recording Press Easy TimerSet the TV channel and recording quality Current time Recording start timeStandard timer recording Press Timer REC to display the Timer Recording screenEnter the timer recording settings Press Enter to set the end timeTimer recording using the Video Plus+ programming system To exit the timer recording screen, press Home MenuVideo Plus+ programming with the power off Extending a timer recording in progressLUS Code NextMoving the end time by 30-minute blocks Canceling and stopping a timer recording in progressProgramming a new end time Recording Timer recording FAQ You can’t enter a timer program if the clock isn’t setSee Connecting up for connection options Simultaneous recording and playbackSet up the recorder Press REC when you’re ready to start recordingSee Audio In settings on page 83 for more on these settings Automatic recording from a satellite tunerAlso, set the camcorder to VTR mode Recording from a DV camcorder DVR-320 onlyAV2/L1 In is set to Decoder see AV2/L1 In on Press Home Menu and select ‘DV Record’ from the menuPlaying your recordings on other DVD players Recording from the DV output DVR-320 onlyFinalizing a disc Press Home Menu and select ‘Disc Setup’ Select ‘Finalize’ How to change the recorder’s settingPress Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Initializing a DVD-RW discEditing Chapter EditingDisc Navigator screen Editing Playlist / Original indicatorDisc Navigator menu options Editing Editing VR mode Original and Video mode content PlayErase Title Name Ttl NameUsing the remote key shortcuts to input a name Chapter Edit Chpt EditEditing Key Characters ’ ?Inserting chapter markers into a title Erase Section Erase SecSelect ‘Erase Sec’ from the Disc Navigator menu options Use TitleLock / Unlock Erase AllUndo This erases all unlocked titles from the disc see also LockYou can give titles new names of up to 64 characters long Editing Creating and editing a VR mode Play ListPress Enter after selecting each character Input a name on Create Original title to put into the Play ListDivide MoveCombine Press Enter to add the titleThis command erases all the titles from the Play List Select ‘Undo’ from the Disc Navigator Play List menu optionsDisc History Using the Disc HistoryDisc History Chapter PhotoViewer PhotoViewer ChapterPlaying a slideshow Reloading files from a discZooming the screen PhotoViewerRotating the screen Disc Setup menu Disc Setup menu ChapterBasic settings Press Home Menu and select ‘Disc Setup’Initialize settings Disc Setup menuFinalize settings Video/Audio Adjust menu Video/Audio Adjust menu ChapterSetting the picture quality for TV and external inputs Choosing a presetSetting the picture quality for disc playback Video/Audio Adjust menuSelect the picture quality setting you want to adjust Black Setup setting applies only when playing Ntsc discs Audio DRCInitial Setup menu Initial Setup menu ChapterUsing the Initial Setup menu Clock SettingInitial Setup menu Power SaveInput Line System On Screen DisplayTuner settings Remote Control SetSetup Navigator Auto Channel Setting Auto ScanAuto Channel Setting Download from TV Manual CH SettingChannel Swapping Set Video Plus+ CHInitial Setup menu Video In / Out settings Input Colour SystemAV1 Out AV2/L1Audio In settings Ntsc on PAL TVNicam Select Tuner LevelAudio Out settings Language settings Default setting w/Subtitle Language Subtitle LanguageAuto Language DVD Menu LanguageRecording settings Selecting ‘Other’ languagesManual Recording Optimized RecPlayback settings Parental Lock Set Password Parental Lock Change PasswordSeamless Playback Parental LockParental Lock Change Level Parental Lock Country CodeAngle Indicator Resetting the recorder Setting up the remote to control yourUsing the TV remote control buttons Additional informationWhen viewing on a widescreen TV or monitor When viewing on a standard TV or monitorAdditional information Screen sizes and disc formats Problem Remedy Additional information TroubleshootingGeneral Additional information Frequently asked questions ProblemAdditional information About DV DVR-320 only DV-related messagesAdditional information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterMessage Cleaning the pickup lens Handling discsStoring discs Damaged discsHints on installation Additional information CondensationManual recording modes Moving the recorderAdditional information Glossary Mpeg video Optical digital outputPCM Pulse Code Modulation PBC PlayBack Control Video CD/Super VCD onlyAdditional information Specifications TimerTuner Input/OutputAV Connectors 21-pin connector assignment Supplied accessoriesPIN no Index Video mode 7, 9, 10, 22, 34, 44, 56, 57, 60, 73, 88, 96 Pioneer Corporation VRB1335-A

DVR-320 specifications

The Pioneer DVR-320 is a versatile and innovative digital video recorder that has garnered attention for its impressive features and user-friendly design. Launched in the early 2000s, it stands out in the DVR market for its ability to blend cutting-edge technology with practicality.

One of the most notable features of the Pioneer DVR-320 is its compatibility with multiple recording formats, including DVD-R, DVD-RW, and DVD-RAM. This versatility allows users to choose the media that best suits their needs, whether for long-term storage or temporary use. The device provides high-quality video recording, ensuring that the content captured is sharp and vibrant.

The DVR-320 is equipped with a built-in digital tuner, enabling users to record live television directly onto a DVD. This feature eliminates the need for separate recording devices and simplifies the process of capturing favorite shows or events. Additionally, the device supports simultaneous recording and playback, allowing users to watch one program while recording another, enhancing multitasking capabilities.

Another key technology featured in the Pioneer DVR-320 is its Time Slip function. This innovative feature allows users to pause live television and rewind to catch missed moments, giving viewers greater control over their viewing experience. This flexibility is particularly appealing for sports fans or viewers wanting to relive critical scenes.

Users will also appreciate the unit's user-friendly interface and remote control, which make navigation straightforward. The on-screen menus are designed for ease of use, ensuring that even those who are not tech-savvy can operate the device without frustration.

In terms of storage, the DVR-320 supports long recording times. With the ability to record in various quality settings, users can choose to maximize recording time or prioritize video quality based on their preferences. The device also includes features like timer recording, which can be programmed to automatically capture shows at specified times.

In summary, the Pioneer DVR-320 is a feature-packed digital video recorder that combines ease of use with advanced recording technology. Its compatibility with various formats, built-in digital tuner, Time Slip functionality, and user-friendly interface make it a noteworthy choice for those looking to enhance their home entertainment systems. Whether for casual viewing or serious recording, the DVR-320 represents a strong option in the realm of digital video recorders.
Top Page Image Contents