Pioneer DVR-320 operating instructions Standard timer recording, Press Enter to set the end time

Recording 06

5 Use the (cursor left/right) to move the cursor to the recording end time on the grid.

Recording start time

Recording end time

Easy Timer Recording

11:00	12:00	13:00	14:00	15:00	16:00	17:00
13/12
14/12
15/12
WED 13/12			11:45		13:45

CHANNEL +/– Pr 7 REC MODE FINE

As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to six hours can be set.

6Press ENTER to set the end time.

7Select ‘Yes’ to set the timer recording and exit, or ‘No’ to go back to the timer recording screen.

•You can check the timer recording details you just set from the main timer recording screen (see Standard timer recording below).

Note

•You can’t use VPS/PDC with Easy Timer Recording. Use the standard or VIDEO Plus+ timer recording methods if you want to use VPS/PDC.

Standard timer recording

The timer recording screen you can see all the timer programs already set, clear programs and set up new ones.

CLEAR

ENTER

HOME

MENU

1Press TIMER REC to display the Timer Recording screen.

You can also access the Timer Recording screen from the Home Menu (press HOME MENU, select Timer Recording, then Timer Recording (View)).

This screen shows all the timer programs currently set.

Timer Recording
Date	Start	Stop	CH	Mode	VPS/PDC
WED 13/12	7:00	8:00	Pr 3	SP	Off
		New Input

DVD Remain 1h20m (SP) 1/1

•Each row is for one timer recording program, with the date and time information, channel, recording mode and the VPS/PDC setting.

•The amount of free space available on the currently loaded recordable DVD is shown towards the bottom of the screen.

•In the lower-right corner, the number of timer programs already set and the number that use VPS/ PDC, is shown next to Tmr Pgms.

•If there are more than eight timer programs already

set, press NEXT to switch page (go back using

the PREV button).

•You can also clear a timer program before it’s started (before the recorder enters timer recording standby) by highlighting it and pressing CLEAR.

2Select ‘New Input’ to set a new timer program, then press ENTER.

Timer Recording
Date	Start	Stop	CH	Rec Mode
12/12 TUE	10 00	11 00	Pr 7	SP
VPS/PDC
OFF	Program Set

Ttl Name Input

PREV NEXT

TIMER REC

3 Enter the timer recording settings.

Use the	(cursor left/right) buttons to select a field;
use the	(cursor up/down) buttons to change the
value.

•Date – Choose a date up to one month in advance, or select a daily or weekly program.

•Start – Set the recording start time.

•Stop – Set the recording end time (maximum length of a timer recording is six hours).

49

En