Pioneer DVR-520H, DVR-720H Playing in slow motion, Frame advance/frame reverse, Slow 1/2, Press

Page 39

Playback

05

No subtitles are displayed while scanning DVD-Video discs.

Analog and digital sound is output when scanning DVDs with Dolby Digital or Linear PCM sound on forward SCAN 1. (Linear PCM is output from the optical digital output.*) No sound is output when using other scan speeds.

*Except during chase playback and simultaneous recording/playback.

No sound is output when scanning from the HDD, except on forward SCAN 1. (Linear PCM is output from the optical digital output during forward SCAN 1).

Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.

Playing in slow motion

DVD

HDD

Video CD

Super VCD

You can play video at various slow motion speeds. DVDs and video on the HDD can be played in slow motion in either direction, while Video CD/Super VCDs can only be played forwards in slow motion.

 

 

PLAY

 

 

STEP/SLOW

1 Press

or

to start slow motion reverse or

forward playback.

 

2Press the same button repeatedly to change the slow motion speed.

SLOW 1/16

SLOW 1/8

SLOW 1/2

SLOW 1/4

3 To resume normal playback, press PLAY.

Note

The picture quality during slow motion playback is not as good as during normal playback and depends on the disc being played.

Reverse slow-motion playback may not be as smooth as forward and may be better with some discs than others.

Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.

No sound is output during slow-motion playback.

Frame advance/frame reverse

DVD

HDD

Video CD

Super VCD

You can advance or back up video on a DVD disc or the HDD frame-by-frame. With Video CD/Super VCDs, you can only use frame advance.

PLAY

PAUSE

STEP/SLOW

1

During playback, press PAUSE.

2

Press

or

to back up or advance one frame.

 

• Hold down

or

for continuous frame reverse/

 

frame advance.

 

3

To resume normal playback, press PLAY.

Note

The picture quality when using frame reverse is not as good as frame advance.

Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.

39

En

Image 39
Contents DVR-420H DVR-520H DVR-720H LASERPRODUCTCLASS1 Operating Environment POWER-CORD CautionContents Disc History Disc Setup menuVideo/Audio Adjust menu Initial Setup menuFeatures Before you startBefore you start Chapter Before you start Putting the batteries in the remote control Using the remote controlBefore you start What’s in the box Compressed audio compatibility General disc compatibilityDVD-R/RW compatibility CD-R/RW compatibilityWMA Windows Media Audio compatibility Jpeg file compatibilityPC-created disc compatibility About the internal hard disk drive Front panel connections Connecting upConnecting up Chapter Rear panel connectionsConnecting up Extra features for use with compatible TVs Connecting up Easy connections Connect the Video Output jack to a video input on your TV Connecting up Using other types of audio/video outputConnect RF antenna cables as shown This enables you to watch and record TV channelsThis enables you to watch discs This enables you to record scrambled TV channelsConnecting up Connecting an external decoder box Scart AV Connector This enables you to listen to multichannel surround sound Connecting up Connecting to an AV amplifier/receiverPlugging Connecting up Connecting other AV sourcesControls and displays Controls and displays ChapterFront panel Ntsc Controls and displays DisplayREM FineReturn Controls and displays Remote controlControls and displays Enter Switching on and setting upGetting started Getting started ChapterGetting started Digital, Dolby Digital, DTS or PCM only, then press Other settings you can makeSelect the TV screen type, ‘Standard 43’ or ‘Wide 169’ Connected, or Not Connected, then press EnterPress REC to start recording When you want to stop recording, pressMaking your first recording Playing back your recordingChanging audio channels Getting started Using the built-in TV tunerSwitching between TV and DVD Changing TV channelsPress OPEN/CLOSE to open the disc tray Load a disc Press STANDBY/ON to switch onGetting started Basic playback Press HDD to playback from the HDD, or DVD to play a DVDPlaying from the HDD Playing DVD discsPlaying Video CD/Super VCDs Playing CDs and WMA/MP3 discsUsing the Home Menu Displaying disc information on- screenHome menu options HDD and removable disc activity display Stop displayPlay display Recording display Introduction Using the Disc Navigator to browse the contents of a discPlayback Playback ChapterSelect ‘Play’ from the menu options Using the Disc Navigator with recordable discs and the HDDPlayback Changing the thumbnail picture for a titleScan Scan 2 Scan Navigating discs and the HDDScanning discs Scan 1 Scan 2 Scan 3 ScanPress Playing in slow motionFrame advance/frame reverse Slow 1/2Repeat Playback Play Mode menuSearch Mode Play ModeProgram play Repeat playRepeat to build up a program list Other Program play functionsPlayback Displaying and switching subtitles Switching DVD soundtracksClear To switch the camera angle, press Angle Playback Switching audio channelsSwitching camera angles To display/switch the audio channel, press Audio repeatedlyAbout HDD recording RecordingRecording Chapter About DVD recordingRecording Recording time and picture quality Restrictions on video recordingRecording equipment and copyright Front panel display shows the channel number Recording Setting the picture quality/recording timePress REC Mode repeatedly to select a recording setting Basic recording from the TVTo stop the recording, press Stop REC RecordingDirect recording from TV Use the Audio button to select the audio channel to recordRecording Setting a timer recording MON 13/12 Easy Timer RecordingPress Enter to set the end time Standard timer recordingPress Timer REC to display the Timer Recording screen Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Timer recording using the Video Plus+ programming systemVideo Plus+ programming with the power off LUS CodeNext Programming a new end time Extending a timer recording in progressCanceling and stopping a timer recording in progress Moving the end time by 30-minute blocksTimer recording FAQ You can’t enter a timer program if the clock isn’t setSimultaneous recording and playback Recording from an external component See Connecting up for connection optionsSet up the recorder Press REC when you’re ready to start recordingAV2/L1 In is set to Decoder see AV2/L1 In on See Audio In settings on page 103 for more on these settings‘Start Rec’ and press Enter Also, set the camcorder to VTR modePress Home Menu and select ‘DV Record’ from the menu UseRecording Recording from the DV output DVR-520H/720H only Playing your recordings on other DVD playersFinalizing a disc Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Initializing a DVD-RW discIt takes about 30 seconds to initialize the disc Copying and back-up Copying and back-up ChapterHigh-speed copying Copying and back-up One Touch Copy* HDD to DVDOne Touch Copy* DVD to HDD Copying from HDD to DVD Canceling One Touch CopyHDD to DVD Copy List menu options Select ‘HDD DVD’HDD to DVD Copy List screen appears Add HDD to DVD Copy List commandsSelect ‘Conf List’ to display the Copy List settings screen Copying and back-up Recording the Copy ListSelect ‘Erase’ from the Copy List menu options EraseTitle Name Ttl Name DivideCombine PreviewMove Select a command from the chapter edit menu options Erase AllChapter Edit Chpt Edit Use Cursor buttons to select a Chapter Edit DivideChapter Edit Combine Chapter Edit MoveErase Section Erase Sec Copying and back-up Copying from DVD to HDD Currently selected DVD titleRunning time Copy List Use Cursor up/down buttons to highlight DVD to HDD Copy List menu optionsSelect ‘DVD DVD to HDD Copy screen appearsCopying and back-up DVD to HDD Copy List commands Using disc back-up Title to move Copy List insertion pointHDD No Disc Please load a disc to be backed-up Start Cancel Editing Editing ChapterDisc Navigator screen Information for Auto Replace Selected title EditingHDD Disc Navigator HDD group tabsDisc Navigator menu options Playlist / Original indicatorPlayback will automatically stop when you do this VR mode OriginalUse this function to start playback of a title Editing VR mode Original, Video mode and HDD contentPlay Erase Section Erase Sec Erase a part of a titleUsing the remote key shortcuts to input a name Key CharactersVideo Inserting chapter markers into a title Lock / Unlock Select ‘Erase Sec’ from the Disc Navigator menu options UseTitle This erases all unlocked titles from the disc see also Lock Select No if you want to cancel and leave the title intactUndo Select ‘Undo’ from the Disc Navigator menu optionsGroup Name Grp Name Creating and editing a VR mode Play ListEditing Editing HDD groups Change Group Chg GroupYou can give titles new names of up to 64 characters long After selecting a title, the Erase Sec screen appears from Press Enter to add the title New title appears in the updated Play ListCreate Original title to put into the Play ListSelect the title that you want to divide, then This command erases all the titles from the Play ListSelect ‘Divide’ from the Disc Navigator Play List Menu optionsUsing the Disc History Disc HistoryDisc History Chapter Reloading files from a disc PhotoViewerPhotoViewer Chapter Playing a slideshowPhotoViewer Zooming the screenRotating the screen Input Disc Name Disc Setup menuDisc Setup menu Chapter Basic settingsDisc Setup menu Finalize settingsInitialize settings Choosing a preset Video/Audio Adjust menuVideo/Audio Adjust menu Chapter Setting the picture quality for TV and external inputsVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Audio DRC Black Setup setting applies only when playing Ntsc discsClock Setting Initial Setup menuInitial Setup menu Chapter Using the Initial Setup menuOn Screen Display Initial Setup menuPower Save Input Line SystemAuto Channel Setting Auto Scan Tuner settingsRemote Control Set Setup NavigatorManual CH Setting Auto Channel Setting Download from TVSet Video Plus+ CH Channel SwappingAV2/L1 Initial Setup menu Video In / Out settingsInput Colour System AV1 OutTuner Level Audio In settingsNtsc on PAL TV Nicam SelectAudio Out settings Language settings DVD Menu Language Default setting w/Subtitle LanguageSubtitle Language Auto LanguageManual Recording Recording settingsSubtitle Display Selecting ‘Other’ languagesFrame Accurate Optimized RecNavi Mark Auto Chapter VideoInitial Setup menu Playback settings Parental Lock Change Password Parental Lock Change LevelParental Lock Country Code Angle Indicator Additional information Resetting the recorderSetting up the remote to control your Using the TV remote control buttonsWhen viewing on a standard TV or monitor When viewing on a widescreen TV or monitorAdditional information Screen sizes and disc formats Additional information Troubleshooting Problem RemedyGeneral Additional information Can’t use One Touch Copy DVD to HDD Frequently asked questionsProblem Can’t use One Touch Copy HDD to DVDDV-related messages About DV DVR-520H/720H onlyVideo mode Additional information Manual recording modesLevel 119 Message Handling discs Damaged discsStoring discs Condensation Additional information Cleaning the pickup lensHints on installation Moving the recorderOptical digital output DRM Digital Rights ManagementMpeg audio Mpeg videoTrack TitleInput/Output Additional information SpecificationsTimer TunerAudio 2/R out / Audio 2/R out Supplied accessoriesAV Connectors 21-pin connector assignment PIN noIndex IndexVRB1340-A Pioneer Corporation