Pioneer DVR-520H, DVR-720H manual No Disc Please load a disc to be backed-up Start Cancel

Page 75

Copying and back-up

07

5 Press OPEN/CLOSE to open the disc tray and load the disc you want to make a back-up of, then close the disc tray.

You can only make back-up copies of finalized Video mode discs.

Disc Back-up

No Disc.

Please load a disc to be backed-up.

Start Cancel

6 Select ‘Start’.

Disc Back-up

Read from disc and save to HDD.

Start reading?

Start Cancel

To see the progress of the back-up, press DISPLAY.

You can cancel the back-up process by pressing ONE TOUCH COPY for more than one second.

7 When the data has been copied, press OPEN/ CLOSE to open the disc tray. Take out the disc and load a blank* recordable DVD.

*If you’re using a DVD-RW, the disc doesn’t have to be blank, although the previous contents of the disc will be erased in the back-up process.

Disc Back-up

Disc content saved to Hard Disk Drive. Please eject the disc and load a recordable disc.

Start Cancel

You can use a DVD-R Ver. 2.0 disc, or DVD-RW Ver. 1.1 or Ver. 1.2 / 4x for the back-up.

If you back-up a DVD-R disc to DVD-RW, you cannot undo the finalization later.

Actual recordable capacity of discs vary so there may be cases where the contents of the disc you’re backing-up will not fit on to a particular blank disc. If this happens, please try another brand of disc.

8Select ‘Start’ to start writing the backed-up data to the blank disc.

Disc Back-up

Write back-up data from Hard Disk Drive.

The disc contents will be overwritten.

OK to start?

Start Cancel

You can cancel the back-up process by pressing ONE TOUCH COPY for more than one second. However, this will make the disc unusable (although if you are using a DVD-RW disc you can re-initialize it in order to make it usable again—see Initializing a DVD-RW disc on page 60.)

9After the recorder has finished recording the back-up disc, you can select whether to make another back-up of the same data or exit.

Disc Back-up

Disc back-up finished.

To make another back-up copy, please load a recordable disc.

Start Cancel

Select Start to make another back-up copy or Cancel to finish. If you want to make another back-up copy, return to step 6 above.

10If you don’t need to keep the back-up data on the HDD, you can delete it now.

Select Yes to delete the data from the HDD; select No to keep it (you can delete it later if you want to).

Disc Back-up

The backed-up data is still on the HDD. Erasing it will increase the free space available. OK to Erase?

Yes No

If you decide to leave the back-up data on the HDD, you can make back-up copies to recordable DVD discs anytime from the Disc Back-up menu.

Note

It is not possible to play material on the HDD that has been backed-up from DVD.

• To see the progress of the back-up, press DISPLAY.

75

En

Image 75
Contents DVR-420H DVR-520H DVR-720H LASERPRODUCTCLASS1 Operating Environment POWER-CORD CautionContents Disc History Disc Setup menuVideo/Audio Adjust menu Initial Setup menuFeatures Before you startBefore you start Chapter Before you start Putting the batteries in the remote control Using the remote controlBefore you start What’s in the box Compressed audio compatibility General disc compatibilityDVD-R/RW compatibility CD-R/RW compatibilityWMA Windows Media Audio compatibility Jpeg file compatibilityPC-created disc compatibility About the internal hard disk drive Front panel connections Connecting upConnecting up Chapter Rear panel connectionsConnecting up Extra features for use with compatible TVs Connecting up Easy connections Connect the Video Output jack to a video input on your TV Connecting up Using other types of audio/video outputConnect RF antenna cables as shown This enables you to watch and record TV channelsThis enables you to watch discs This enables you to record scrambled TV channelsConnecting up Connecting an external decoder box Scart AV Connector This enables you to listen to multichannel surround sound Connecting up Connecting to an AV amplifier/receiverPlugging Connecting up Connecting other AV sourcesControls and displays Controls and displays ChapterFront panel Ntsc Controls and displays DisplayREM FineReturn Controls and displays Remote controlControls and displays Enter Switching on and setting upGetting started Getting started ChapterGetting started Digital, Dolby Digital, DTS or PCM only, then press Other settings you can makeSelect the TV screen type, ‘Standard 43’ or ‘Wide 169’ Connected, or Not Connected, then press EnterPress REC to start recording When you want to stop recording, pressMaking your first recording Playing back your recordingChanging audio channels Getting started Using the built-in TV tunerSwitching between TV and DVD Changing TV channelsPress OPEN/CLOSE to open the disc tray Load a disc Press STANDBY/ON to switch onGetting started Basic playback Press HDD to playback from the HDD, or DVD to play a DVDPlaying from the HDD Playing DVD discsPlaying Video CD/Super VCDs Playing CDs and WMA/MP3 discsUsing the Home Menu Displaying disc information on- screenHome menu options HDD and removable disc activity display Stop displayPlay display Recording display Introduction Using the Disc Navigator to browse the contents of a discPlayback Playback ChapterSelect ‘Play’ from the menu options Using the Disc Navigator with recordable discs and the HDDPlayback Changing the thumbnail picture for a titleScan Scan 2 Scan Navigating discs and the HDDScanning discs Scan 1 Scan 2 Scan 3 ScanPress Playing in slow motionFrame advance/frame reverse Slow 1/2Repeat Playback Play Mode menuSearch Mode Play ModeProgram play Repeat playRepeat to build up a program list Other Program play functionsPlayback Displaying and switching subtitles Switching DVD soundtracksClear To switch the camera angle, press Angle Playback Switching audio channelsSwitching camera angles To display/switch the audio channel, press Audio repeatedlyAbout HDD recording RecordingRecording Chapter About DVD recordingRecording Recording time and picture quality Restrictions on video recordingRecording equipment and copyright Front panel display shows the channel number Recording Setting the picture quality/recording timePress REC Mode repeatedly to select a recording setting Basic recording from the TVTo stop the recording, press Stop REC RecordingDirect recording from TV Use the Audio button to select the audio channel to recordRecording Setting a timer recording MON 13/12 Easy Timer RecordingPress Enter to set the end time Standard timer recordingPress Timer REC to display the Timer Recording screen Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Timer recording using the Video Plus+ programming systemVideo Plus+ programming with the power off LUS CodeNext Programming a new end time Extending a timer recording in progressCanceling and stopping a timer recording in progress Moving the end time by 30-minute blocksTimer recording FAQ You can’t enter a timer program if the clock isn’t setSimultaneous recording and playback Recording from an external component See Connecting up for connection optionsSet up the recorder Press REC when you’re ready to start recordingAV2/L1 In is set to Decoder see AV2/L1 In on See Audio In settings on page 103 for more on these settings‘Start Rec’ and press Enter Also, set the camcorder to VTR modePress Home Menu and select ‘DV Record’ from the menu UseRecording Recording from the DV output DVR-520H/720H only Playing your recordings on other DVD playersFinalizing a disc Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Initializing a DVD-RW discIt takes about 30 seconds to initialize the disc Copying and back-up Copying and back-up ChapterHigh-speed copying Copying and back-up One Touch Copy* HDD to DVDOne Touch Copy* DVD to HDD Copying from HDD to DVD Canceling One Touch CopyHDD to DVD Copy List menu options Select ‘HDD DVD’HDD to DVD Copy List screen appears Add HDD to DVD Copy List commandsSelect ‘Conf List’ to display the Copy List settings screen Copying and back-up Recording the Copy ListSelect ‘Erase’ from the Copy List menu options EraseTitle Name Ttl Name DivideCombine PreviewMove Select a command from the chapter edit menu options Erase AllChapter Edit Chpt Edit Use Cursor buttons to select a Chapter Edit DivideChapter Edit Combine Chapter Edit MoveErase Section Erase Sec Copying and back-up Copying from DVD to HDD Currently selected DVD titleRunning time Copy List Use Cursor up/down buttons to highlight DVD to HDD Copy List menu optionsSelect ‘DVD DVD to HDD Copy screen appearsCopying and back-up DVD to HDD Copy List commands Using disc back-up Title to move Copy List insertion pointHDD No Disc Please load a disc to be backed-up Start Cancel Editing Editing ChapterDisc Navigator screen Information for Auto Replace Selected title EditingHDD Disc Navigator HDD group tabsDisc Navigator menu options Playlist / Original indicatorPlayback will automatically stop when you do this VR mode OriginalUse this function to start playback of a title Editing VR mode Original, Video mode and HDD contentPlay Erase Section Erase Sec Erase a part of a titleUsing the remote key shortcuts to input a name Key CharactersVideo Inserting chapter markers into a title Lock / Unlock Select ‘Erase Sec’ from the Disc Navigator menu options UseTitle This erases all unlocked titles from the disc see also Lock Select No if you want to cancel and leave the title intactUndo Select ‘Undo’ from the Disc Navigator menu optionsGroup Name Grp Name Creating and editing a VR mode Play ListEditing Editing HDD groups Change Group Chg GroupYou can give titles new names of up to 64 characters long After selecting a title, the Erase Sec screen appears from Press Enter to add the title New title appears in the updated Play ListCreate Original title to put into the Play ListSelect the title that you want to divide, then This command erases all the titles from the Play ListSelect ‘Divide’ from the Disc Navigator Play List Menu optionsUsing the Disc History Disc HistoryDisc History Chapter Reloading files from a disc PhotoViewerPhotoViewer Chapter Playing a slideshowPhotoViewer Zooming the screenRotating the screen Input Disc Name Disc Setup menuDisc Setup menu Chapter Basic settingsDisc Setup menu Finalize settingsInitialize settings Choosing a preset Video/Audio Adjust menuVideo/Audio Adjust menu Chapter Setting the picture quality for TV and external inputsVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Audio DRC Black Setup setting applies only when playing Ntsc discsClock Setting Initial Setup menuInitial Setup menu Chapter Using the Initial Setup menuOn Screen Display Initial Setup menuPower Save Input Line SystemAuto Channel Setting Auto Scan Tuner settingsRemote Control Set Setup NavigatorManual CH Setting Auto Channel Setting Download from TVSet Video Plus+ CH Channel SwappingAV2/L1 Initial Setup menu Video In / Out settingsInput Colour System AV1 OutTuner Level Audio In settingsNtsc on PAL TV Nicam SelectAudio Out settings Language settings DVD Menu Language Default setting w/Subtitle LanguageSubtitle Language Auto LanguageManual Recording Recording settingsSubtitle Display Selecting ‘Other’ languagesFrame Accurate Optimized RecNavi Mark Auto Chapter VideoInitial Setup menu Playback settings Parental Lock Change Password Parental Lock Change LevelParental Lock Country Code Angle Indicator Additional information Resetting the recorderSetting up the remote to control your Using the TV remote control buttonsWhen viewing on a standard TV or monitor When viewing on a widescreen TV or monitorAdditional information Screen sizes and disc formats Additional information Troubleshooting Problem RemedyGeneral Additional information Can’t use One Touch Copy DVD to HDD Frequently asked questionsProblem Can’t use One Touch Copy HDD to DVDDV-related messages About DV DVR-520H/720H onlyVideo mode Additional information Manual recording modesLevel 119 Message Handling discs Damaged discsStoring discs Condensation Additional information Cleaning the pickup lensHints on installation Moving the recorderOptical digital output DRM Digital Rights ManagementMpeg audio Mpeg videoTrack TitleInput/Output Additional information SpecificationsTimer TunerAudio 2/R out / Audio 2/R out Supplied accessoriesAV Connectors 21-pin connector assignment PIN noIndex IndexVRB1340-A Pioneer Corporation