3.5.3.4Press ” MENU” to exit and confirm current operation.
3.5.3.5Press ” MENU” again to exit and close SYSTEM setup mode.
3.5.4MOTION AUDIBLE ALARM
To set the MOTION AUDIBLE ALARM. It will be trigged by motion detection occurrence when the setting is ON.
3.5.5ALARM DURATION Setup option:
This device allows user to set the ALARM DURATION. Reaction time was determined by how long the alarm mode responded to a buzzer.
3.5.5.1Press ” Up” or “ Down” to choose ALARM DURATION setup.
3.5.5.2Press ” ENTER” to confirm ALARM DURATION setup.
3.5.5.3Press ” Up” or “Down” to choose ALARM DURATION setup
10 SEC, 15 SEC, 20 SEC, 30 SEC, 1MIN, 2MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN,
30MIN, ALWAYS.
3.5.5.4Press ” MENU” to exit and confirm current operation.
3.5.5.5Press ” MENU” again to exit and close SYSTEM setup mode.
3.5.6DWELL TIME setup
This device allows user to set the DWELL TIME. DWELL TIME is the lasting time that each channel sequentially shown on monitor.
3.5.6.1Press ” Up” or “ Down” to choose DWELL TIME setup.
3.5.6.2Press ” ENTER” to confirm DWELL TIME setup.
3.5.6.3Press ” Up” or “ Down” to choose DWELL TIME setup.
01~10 SEC.
3.5.6.4Press ” MENU” to exit and confirm current operation.
3.5.6.5Press ” MENU” again to exit and close SYSTEM setup mode.
3.5.7MESSAGE LATCH setup
This device allows user to decide the 
External Alarm graph 
video loss graph showed on monitor or not.
3.5.7.1Press ” Up” or “ Down” to choose MESSAGE LATCH setup
3.5.7.2Press ” ENTER” button to confirm MESSAGE LATCH setup
3.6.7.3Press ” Up” or “ Down” to choose the MESSAGE LATCH : ON/OFF
ON : Message latch ON
OFF : Message latch OFF
3.6.7.4Press ” MENU” to exit and confirm current operation.
3.6.7.5Press ” MENU” again to exit and close SYSTEM setup mode.
3.5.8TITLE DISPLAY setup
16