RCA AVC 776 appendix Operation, Power on

Page 31

After keying in correct password, and confirm

 

 

by pressing ”ENTER” button, Following screen

(MENU)

will be displayed. SEARCH ------- find recorded

SEARCH

list

 

 

TIMER

 

 

TIMER

------- scheduling Record

RECORD

CAMERA

RECORD------- Record Mode Setup

SYSTEM

CAMERA ------- Camera Channel Setup

► EVENT

SYSTEM ------- System Setup

 

EVENT

-------- Event List

 

 

 

 

Press “ENTER” to confirm Full List, and the

 

 

 

 

screen will be as right displayed.

 

 

Press ” ” Up ” or “ Down ” to choose wanted

M–HDD WARNING 2002-JAN-01 03:00:00

M–HDD LOSS

2002-JAN-01 03:00:00

 

recorded event (Only 8 recorded events will

M–HDD ERROR

2002-JAN-01 03:00:00

be shown on a single page), and press

S–HDD WARNING 2002-JAN-01 03:00:00

HDD FULL

2002-JAN-01 03:00:00

 

“ Left ” or “ Right ” to change the pages.

SYSTEM ERROR

2002-JAN-01 03:00:00

Press “ENTER” to Play selected recorded

----02 VLOSS

2002-JAN-01 03:00:00

----03 ALARM

2002-JAN-01 03:00:00

 

video

◄: PAGE UP ►: PAGE DOWN◄+►: CLEAR

 

 

 

 

 

 

 

 

M-HDD WARNING: Master HDD might be failed.

M-HDD LOSS: Master HDD does not exist. Now user can use the other HDD.

M-HDD ERROR: Master HDD might be error

S-HDD WARNING: Slave HDD might be failed

S-HDD LOSS: Slave HDD does not exist. Now user can use the other HDD.

S-HDD ERROR: Slave HDD might be error

HDD FULL: HDD is full

SYSTEM ERROR: System might be failed

----02 VLOSS: Channel: 2 Video loss

----03 ALARM: Channel: 3 External I/O Alarm have triggered

POWER RESTORE : Power restore

4. Operation

4.1Power on

Before powering on the unit, make sure the HDD has been locked, and the POWER LED is

red color now. After pressing POWER button, POWER LED will turn to orange color, then all

other LED light will turn to RED color except the LED for HDD. OSD screen will display “HDD

Detecting”, Power on running time will take approximately 15 to 20 seconds. If HDD is set as

Master, and screen will display “ MASTER HDD CONNECTED”. If HDD is set as Slave, and

screen will display “SLAVE HDD CONNECTED”. In order to shorten the power on running

31

Image 31
Contents Introduction Features Safety WarningSpecifications Installation Connection Install HDD PAL System IPS Front panel keypadOFF Ntsc System IPS17 16 15 14 Call Back panel connectionAudio OUT R/L PIN 1. GND Ground PIN 2. Alarm InputMain PIN 4. Alarm Input PIN 3. Alarm InputPIN 5. Alarm Input PIN 17. Alarm Input PIN 13. External Alarm noPIN 14. PIN OFF PIN 15. Alarm Input PIN 16. Alarm InputPIN 25. External Alarm COM Menu setupSystem setup PIN 21. PIN OFF PIN 22. Alarm InputSearch Timer Record Camera System Event Time Display Y/M/D 30 MIN, Always Motion Audible AlarmPage ALL Data in HDD will be Cleared are YOU SURE? no YES Search setup Last Record Full List Alarm List Motion List Time Search Show a listing of all motion detection triggered Timer setup Schedule Time-Lapse record mode setup BEST, HIGH, NORMAL, Basic Record setupDisplayed.SEARCH Find recorded list Motion Trigger Record Title Dwell Alarm Record LOW Event Camera setupMenu Page Motion Detection Setup Event Motion Detection Setup ALLOperation Power onRecording Zoom Camera SelectSelect Piture in Picture PIPPlay Problem Remedy Trouble shootingManufacturer Model Capacity Rotation Compatible HDD brands