Connections & Setup
Red
Yellow
White
Connecting the Device with Video (Basic)
This connection allows you to connect a device that has a Video Out jack, for example, a satellite receiver.
Composite cables are color coded- Yellow= video; Red= right audio; white= left audio
Note: If the device you're connecting also has Component Video jacks and you have component video cables, we recommend you use the Component Video (Advanced) Connection instead. See instructions below.
Using the example of a satellite receiver:
1.If necessary, connect your cable and/or
2.Connect your yellow video cable.
Connect a video cable to the VIDEO INPUT 1 jack on the back of the TV/DVD and to the Video Output jack on the satellite receiver.
3.Connect your red and white audio cables.
Connect the audio (red and white) cables to the AUDIO INPUT 1 R and L jacks on the back of the TV/DVD and to the Audio Output jacks on the satellite receiver.
Green
Blue
Red
Component Video cables (Y Pb Pr) are color coded- Green, Blue and Red
Red
White
Audio cables are color coded- Red= right audio; white= left audio
Connecting the Device with Component Video (Advanced)
This connection allows you to connect a device that has Y Pb Pr jacks, for example, a satellite receiver.
Using the example of a satellite receiver:
1.If necessary, connect your cable and/or
2.Connect your Y Pb Pr component video cables.
Connect three video cables or special Y Pb Pr cables to the COMPONENT (INPUT 3) Y Pb Pr jacks on the back of the TV/DVD and to the Y Pb Pr outputs on the satellite receiver.
3.Connect your red and white audio cables.
Connect the audio (red and white) cables to the INPUT 3 AUDIO R and L jacks on the back of the TV/DVD and to the Audio Output jacks on the satellite receiver.
POWER button
POWER | DISPLAY | TV/DVD |
|
|
|
|
|
| VOL |
1 | 2 | 3 |
|
|
4 | 5 | 6 |
|
|
|
|
|
| MUTE |
7 | 8 | 9 |
|
|
|
| SLEEP |
|
|
SETUP/ | 0 |
|
| DVD |
TV MENU | CH |
| MENU | |
|
|
| ||
| ENTER |
|
| |
EXIT/ |
|
|
| TOP MENU |
CANCEL |
|
|
| |
| CH |
|
| |
SEARCH | PLAY |
| SEARCH | |
SKIP | SUBTITLE | STOP |
| SKIP |
SLOW | PAUSE/STILL PLAY MODE | SLOW | ||
AUDIO | RETURN | REPEAT | ANGLE | |
SCREEN SIZE MARKER | JUMP | QUICK VIEW/ | ||
| ZOOM |
INPUT
SELECT
INPUT SELECT button
Use these buttons to view the picture of the device you’ve connected to the TV.
Viewing the Picture from the Connected Device
1.Plug in the TV/DVD (see page 13 for details) and the device, if they aren't already plugged in.
2.Turn on the TV and the device you want to view, for example a satellite receiver.
3.Press the INPUT SELECT button on the remote control and select VIDEO1 from the input list (if connected to the VIDEO INPUT 1 jack) or COMPONENT (if connected to the COMPONENT jacks). To go back to viewing TV channels, press the INPUT SELECT button and select ANT from the input list.
•If you're done connecting devices to your TV, go to page 14 to complete the Initial Setup.
•To continue connecting devices, go to the next page.
Chapter 1 | 9 |