Using the TV’s Menu System
Signal Type
The Signal Type screen lets you choose whether you are receiving a signal from cable TV or an
Auto Tuning
This menu lets you specify the various components you have connected to your TV. It lets you program a component button on the remote control (VCR1, VCR2, DVD, or SAT•CABLE) so that pressing the button automatically turns on the TV and turns the TV to the correct video input channel (see the Features chapter on page 46 for detailed information).
DTVLink® (Digital Television Link)
Better known to some as IEEE 1394 or FireWire*, these jacks enable connection of
Some DTVLink set top devices need an additional analog video connection to the TV. The screen tells you which device needs this connection. You then select which analog input is used for the connection.
Notes: When a device is plugged in or unplugged, the DTVLink screen is updated automatically.
Some IEEE 1394 devices supply power to other devices. This TV does not supply power to other devices.
Some devices that do not support Digital Copy Protection may cause errors on the DTVLink connection if another source that supports Digital Copy Protected material is connected to the DTVLink.
Special Features
Initial Channel and Initial Volume are two special features that are for commercial/retail use only.
Initial Channel You can select the channel that your TV tunes to each time the TV is turned on or plugged in.
Initial Volume This features works only if the Initial Channel feature is set to On. Select the volume level that you want when the TV is turned on.
Chapter 4 | 61 |