Using the TV’s Features
Digital or Analog TV Channels
A single
Note: Subchannels (sometimes called minor channels) are channels associated with the Primary channel (sometimes called the major channel). A primary channel may have just one subchannel or multiple subchannels.
Primary | Subchannel |
Channel | (if necessary) |
Tip:
Use the channel banner to determine whether a channel is digital or analog. A digital (ATSC or QAM) channel may have a dash and second number after it (e.g.,
Ch6088- |
Listening to English in SRS |
MPAA - Not Rated
Cable Input 4:3 Normal 480i SD
Direct Tuning to a Channel
learning
TV | TV button |
DVD VCR |
|
SAT/CAB AUX AUDIO
CCPRESETS FREEZE LIGHT
CC 
FORMAT INFO
i
CLEARMENU
C 
M
Right arrow
SOUNDSKIP
Tip
If a digital and analog channel have the same primary channel number, tune to the analog channel by entering the analog channel number or entering the analog channel number and then a subchannel of “0.”
1.Make sure the remote is in TV mode by pressing TV on the remote control.
2.Enter the primary channel number. This number appears in the primary channel entry box. Press OK or wait a few seconds. If you don’t enter a subchannel, the TV tunes to the lowest digital subchannel.
3.If the primary channel number has fewer than six digits (for cable), or two digits (for antenna) and you want to enter subchannel numbers, press the right arrow button to advance to the subchannel entry box.
4.Enter the number of the subchannel. This number appears in the subchannel entry box.
5.Press OK to tune to the channel or wait a few seconds and the TV tunes to the channel.
Notes: You can always use the channel up and down buttons on the remote control to change channels within the TV mode.
If you wait too long before entering the subchannel, the TV tunes to the lowest digital subchannel.
Chapter 3 | 45 |