Using the TV’s Menu System
0Go Back
1Equalizer Presets
2Audio Processor
3Sound Logic
4Audio Mode
5SAP
6Balance
7Audio Connections
Main Menu4Audio
Off
On
Turning Sound Logic on will monitor a program's audio track and limit volume excursions to a minimum and maximum volume range from the current volume setting. Acting like a dynamic range limiter, it compresses the dynamic range to limit sudden volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts).
A change in this screen is applied to all inputs.
Press 5 or 6 to point to an option, then press OK to select it. Press 3to return to the menu.
Sound Logic
Acting like a dynamic range limiter; it compresses the dynamic range to limit sudden volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts). Choose On or Off, depending on your preference.
0Go Back
1Equalizer Presets
2Audio Processor
3Sound Logic
4Audio Mode
5SAP
6Balance
7Audio Connections
Main Menu4Audio
Default Audio Mode | Currently Playing | |
English | Audio Mode (1 of 1) | |
Spanish | ||
| ||
Spanish | Change Audio | |
| ||
French | The number of Audio Modes available | |
German | ||
for the current program is 1. | ||
Italian | If the Default Audio Mode is available, then it | |
Japanese | ||
will be heard; otherwise, the mode listed | ||
Korean | above is heard. Use the button above | |
to change the current program's audio. | ||
| ||
Chinese | Audio Mode is only available for | |
|
A change in this screen is applied to all inputs.
Press OK to change the Currently Playing Audio Mode (if more than one is available).
Audio Mode
The Audio Mode menu lets you choose the default audio mode you want to hear for ATSC (digital TV) programs. If the Audio Mode icon ( 
) in the banner lights, it means there is more than one audio mode available. The system automatically sets the audio program to the default audio mode from the menu when the channel you are viewing is a digital channel and the specified language is available for that program.
In the Audio Mode menu, highlight the default audio mode you usually want to hear by pressing the up and down arrow buttons on your remote control. Press OK to hear that language by default whenever available on a channel.
Some programs can have audio mode available that can be heard but that cannot be set as the default. To select and hear those audio modes, navigate to the “Change Audio” action button and select OK, or use the SOUND button on the remote.
Note: You can change the Audio Mode temporarily by pressing the SOUND button on the remote control. Changing channels reverts the Audio Mode back to the default Audio Mode originally selected in the menu.
0Go Back
1Equalizer Presets
2Audio Processor
3Sound Logic
4Audio Mode
5SAP
6Balance
7Audio Connections
Main Menu4Audio
Off
On
SAP stands for "Second Audio Program". When SAP is available for a program, the SAP icon in the channel banner will light up. SAP content can be another language, descriptions for the visually impaired, or audio not related to the program (for example, music or news).
If you set "SAP On" and SAP is available for a program, you will hear SAP for any channel where it is available. SAP is only available for analog (NTSC) programs.
A change in this screen is applied to all inputs.
Press 5 or 6 to point to an option, then press OK to select it. Press 3to return to the menu.
SAP (Second Audio Program)
When turned on and available, Second Audio Program plays the analog program’s audio in a second language. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired. SAP might also contain audio which is totally unrelated to the video.
Notes: SAP is broadcast in mono and is only available for analog programs, not digital programs.
You can activate SAP (if available) temporarily with the SOUND button. Changing channels or inputs reverts SAP back to the SAP menu setting.
0Go Back
1Equalizer Presets
2Audio Processor
3Sound Logic
4Audio Mode
5SAP
6Balance
7Audio Connections
Main MenuAudio
Set the balance using the left and right arrows on the remote control.
A change in this screen is applied to all inputs.
Balance allows you to adjust speaker balance output. Use the and keys to adjust the speaker balance left or right.
Balance
The Balance setting applies to the internal speakers and the headphone output. Balance is how much audio (loudness) gets sent to the left and right speakers.
Note: Balance applies if the Fixed/Variable Audio Output is set to Variable Output, Speakers On. See the following page for more information.
70 | Chapter 4 |