Listening to the radio
Tuning
1Press the
2Press the TUNER (BAND) button to select the desired fre- quency band (FM or AM).
3Press the TUNING/FOLDER (
or 
) button to tune into the desired station.
Manual tuning:
Press the TUNING/FOLDER (
or 
) button as many times as required to tune in the desired station.
Auto tuning:
When the TUNING/FOLDER (
or 
) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/FOLDER (
or 
) button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator. "
" will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural and the sound becomes clearer.
FM stereo receiving indicator
MHz
ST 
FM stereo mode indicator
Note:
This product can receive FM stereo/ FM monaural and AM monaural broadcasts. AM stereo broadcasts will not be played in stereo.
Radio
21