Sony XL-MP2H Use, „ Aerial connection, „ Speaker connection, „ AC power connection

„Aerial connection

Attached FM aerial:

Position the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM loop aerial socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial:

< Assembling > < Attaching to the wall >

Wall Screws (not supplied)

XL-MP2H

„Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal.

Red	Black
Caution:
z Use speakers with an impedance of 4 ohms or more, as lower			Use
impedance speakers can damage the unit.
z Do not mistake the right and the left
channels. The right speaker is the one on the			for
right side when you face the unit.
z Do not let the bare speaker wires touch			Preparation
each other.
z Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z Do not stand or sit on the speakers. You may		Incorrect
be injured.
„ AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.

Wall socket

(AC 220 - 240V, 50/60 Hz)

Note:

zUnplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

9