Connections & Setup
DVD Player + TV + VCR + Satellite Receiver
1.Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.Connect the video cable.
A.Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV.
OR
B.
OR
C. Component video (optional, not shown in illustration) – If your TV has component video (Y, PB, and PR jacks) use
3.Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the VCR.
4.Use a coaxial cable to connect the antenna output on the VCR to the antenna input on the TV.
5.Plug in the AC power cord into an AC outlet.
Go to page 20
Chapter 1 | 17 |