Connections & Setup
DVD Player + TV + Dolby Pro Logic or Stereo
Receiver
To Connect the DVD Player
1.Connect the left and right audio cables to your audio/video receiver and to the AUDIO OUT FRONT L (left – white) and R (right – red) jacks on the back of your DVD Player.
2.Connect the video cable.
A.Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV.
OR
B.
OR
C. Component video (optional) – If your TV has component video (Y, PB, and PR jacks) use
3.Plug in the AC power cord into an AC outlet.
Go to page 20
Chapter 1 | 15 |