RCA RC5227P user manual How to Find Your TVsVideo Input Channel, Variations

Connections Ik Setup

How to Find Your TV'sVideo Input Channel

You need to tune your TV to the Video Input Channel (or S-Video Channel if you connected the S-Video cable to your TV and to your DVD Player) to see the DVD Player's menu and to see the content that's on a disc. The video channel on TVs varies for different brands and different models. In order for your DVD remote to work, your TV must be set on the correct video input channel. Below are some things to try.

•If your TV brand is RCA, GE, or PROSCAN, press the TV button on the remote that came with your TV (not the DVD remote). Then press the INPUT button on the remote.

•If you have another brand, consult your TV's Owner's Manual.

If those options don't work, try one of the following options.

•Press a button on the TV remote (see table below).

•Select it from the TV's menu system.

•Tune direcdy to the DVD input channel by pressing a specific number (see table below).

•Go through all the channels in the channel list by pressing the channel up/down buttons on the TV.

Some common scenarios are listed in the following table:

	Video	Input Channel	Variations
Button/Switch		Button on the	Channel #
on the TV		TV Remote
VIDEO		VID 1	00
SIGNAL		LINE	90
VID	1	VID	91
VID	2	VIDEO	92
S-VID		S-VID	93
S-VIDEO		INPUT	VID	1
		S-VIDEO	VID	2
		SOURCE
		AUX

22 Chapter I