THE MENU SYSTEM
4.Use the arrow buttons and MENU•SELECT to select the house and module codes that match the device’s remote module and label the module. Select Save Setup to complete the setup.
Device Control
Once the device is set up, there are two ways to control it; with the menu system, or with a timer. Select a device from the Home Control menu screen. You can then; turn it on, turn it off, or adjust the brightness for lamp modules.
Select Edit Setup to change a device.
Control the device from the menu.
To schedule a timer:
1.Select Set Timer.
2.Schedule a timer by completing the
Complete the
3.Use the arrows and MENU•SELECT to enter an on and off time.
4.Point to and select Run Timer.
Clear Timer removes all the timer information.
Suspend turns off the timer, but saves the timer information.
indicates the timer is set.
indicates the timer is suspended.
You can schedule several timers to control the same device at different times.
53