REFERENCE
OUT
TO
TV
IN
VIDEO | R AUDIO L | VCR CONTROL | SATELLITE IN | LOW SPEED DATA | PHONE JACK |
CH 4
CH 3
FROM
ANT
BACK PANEL CONTROLS
OUT TO TV Use to connect the DSS® receiver to your TV. However, if your TV has audio/video jacks, you should use those jacks to get better picture and sound quality.
IN FROM ANT Use to connect an
CH3/CH4 SWITCH If a coaxial cable is used to connect the DSS® receiver to your TV, you must set the CH3/CH4 SWITCH. For example, to see the DSS® signal on TV channel 3, set the switch to 3.
VIDEO Provides better picture quality than the OUT TO TV jack. If your TV has audio/video capability, use this jack to connect the DSS® receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If your TV has audio/video capability, use these jacks to connect the DSS® receiver to your TV. You must also connect the VIDEO jack.
VCR CONTROL Allows the receiver to control your VCR.
SATELLITE IN Use to connect the DSS® receiver to the satellite dish antenna.
LOW SPEED DATA PORT this port allows you to connect the DSS® system to accessories, such as the Home Control base module.
PHONE JACK Use to connect a phone line to the DSS® receiver. The DSS® system requires a phone line connection to periodically call out to program providers.
59