Easy setting
1 Turn on the TV, then select the appropriate AV input to suit the connections to this unit.
2 Press [Í] on the remote control or [Í/I] on this unit.
•The Easy Setting will start at the initial power on.
3 Follow the
•When the Download from TV screen appears, the setting information on the TV is acquired by this unit. (> 62)
•When the Auto Setup screen appears, the unit searches for the terrestrial digital channels. It takes about 3 minutes.
Digital TV Auto Tuning
Scan | CH 6 |
| 69 |
This will take about 3 minutes. | Type |
| |
RF Ch | Channel Name | Quality | |
35 |
| Digital TV | 10 |
35 |
| Digital TV | 10 |
Digital TV: 2
Searching
RETURN
After tuning has been completed, clock will be set automatically.
If the clock setting screen appears, set the time manually (> 78, Clock).
Getting started
4 Set “Power Save” to “On”, “On Timer” or “Off”, then press [OK].
Power Save in Standby
|
| Power Save | ||
|
|
|
| On |
From | To | |||
0 |
|
| 6 |
|
Standby power consumption is saved by disabling
Quick Start function.
Unit’s Display is set to “Automatic”.
OK
RETURN
•On
It will go into the Power Save in Standby mode.
•On Timer
Set the period of power save and then press [OK].
•Power Save in Standby mode is activated at the set time period.
•Off
It is possible to start quickly from the standby mode. (Quick Start mode)
When “Easy Setting has been completed.” appears, Easy setting is complete.
To stop partway
Press [RETURN 
].
To restart set up
1While stopped
Press [SETUP]. (> 16)
2Select “Auto Setup” in “Digital TV Tuning”, then press [OK].
3Select “Yes”, then press [OK].
If the TV aspect setting screen appears
Refer to “TV Aspect”. (> 74)
To confirm that channels have been tuned correctly
Refer “Using Channel List”. (> 20)
•If tuning is cancelled partway through, it may not be possible to receive the channels. Restart setup again.
VQT4C71 17