Troubleshooting
The unit is switched to standby mode automatically.
• VIERA Link has worked. (> 62, Power off link)
The remote control doesn’t work.
•The remote control and main unit are using different codes. Change the code on the remote control.
| Press and hold [OK] | |
| and the indicated | |
| number button at the | |
Unit’s display | same time for more | |
than 5 seconds. | ||
| ||
| (> 77) |
•Software (firmware) is updating when “UPD /” is displaying on the unit’s display. Wait until the update is completed. (> 80)
•The HOLD function is activated. (> 81)
Startup is slow.
•Startup takes time in the following situations:
-A disc is inserted.
-The clock is not set.
-Immediately after a power failure or the AC mains lead is connected.
-When the “Power Save in Standby” is activated. (> 77)
Displays
“0:00” is flashing on the unit’s display.
• Set the clock. (> 78)
The clock does not display on the unit when switched to standby.
•The clock does not display when “Power Save in Standby” is activated. (> 77)
TV screen and video
Screen size is wrong.
•Check the “TV Aspect” or “Aspect for 4:3 Video”. (> 74)
•Adjust the aspect ratio setting on TV.
•If you connect to 4:3 TV, set “HDMI Video Format” to “576p/480p”. (> 66, 74)
•Check “Aspect for Recording” before recording or file conversion. (> 66, 70)
The black screen appears on the TV.
•This phenomenon may occur, depending on the TV setting, when “Power Save in Standby” is set to “Off”. Depending on the TV, this phenomenon may be prevented by reconnecting to a different HDMI input terminal.
Picture does not appear with the HD quality although HD setting was made.
•The pictures are output with 576p/480p depending on the title.
VQT4C71 83