Convenient functions
Others
Standby Settings
Power Save in Standby
•On:
It will go into the “Power Save in Standby” mode.
•On Timer:
“Power Save in Standby” is activated when the set time comes.
•If the clock has not been set, “Power Save in Standby” is activated at all hours.
•Off:
It is possible to start quickly from the standby mode. (Quick Start mode)
•This function cannot be enabled when the DLNA
function is enabled in “Home Network ( DLNA ) Settings” or “Server ( DLNA ) Settings”. (> 76)
Automatic Standby
Set the time to turn the unit to standby mode automatically.
When the unit is not operating, the unit will be turned to standby mode once the set time has passed.
Automatic Standby after OTR
•On:
This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing One Touch Recording (> 24).
Automatic Standby after Copy
•On:
This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy (> 40, Copying titles).
Remote Control
Change the remote control code on the main unit and the remote control if you place other Panasonic products close together.
•Use “DVD 1”, the factory set code, under normal circumstances.
1Select the code, then press [OK].
2While pressing [OK], press and hold the number button ([1] to [6]) for more than 5 seconds.
3Press and hold [OK] for more than 5 seconds.
4Press [OK].
•Operation is possible only with Panasonic remote controls with “IR6” printed at the bottom when the remote control code of this unit is set to “DVD 4”, “DVD 5” or “DVD 6”.
DVD IR6 | IR6 |
VQT4C71 77