Panasonic VW-BN1 operating instructions ¬ Troubleshooting, Problem Check points

¬Troubleshooting

Problem	Check points
This unit cannot be	≥ Is the AC adaptor connected?
turned on.	>Connect the AC adaptor and the AC cable correctly. (P9)
This unit cannot be	≥ Disconnect the AC adaptor and then about 1 minute later
operated even when	connect it again. (Conducting the above operation when the
powered up.	access lamp is on may destroy the data on the disc.) If normal
This unit does not	conditions are not restored, detach from the connected power
	source and consult the dealer who you purchased this unit from.
operate normally.
	≥ The disc will not eject unless this unit is powered.
	>Connect the AC adaptor.
The [<] button does not	≥ The [<] button may not work when copying from a
	connected Camcorder to a disc is in progress.
work.	>Wait until the copying is finished.
	≥ In cases other than the above, detach from the connected
	power source and consult the dealer who you purchased this
	unit from.
The disc cannot be read.	≥ Is the disc scratched or dirty?
	>Wipe off the dirt on the disc. (P7) If the disc is scratched,
Copying stops.	insert a new one.
	≥ The internal temperature of this unit is high. Disconnect the AC
The playback motion	adaptor, wait a short while and then you will be able to use this
video/pictures breaks up	unit again.
for a moment.	≥ Discs recorded on other devices may not be correctly read or
	played back on this device.
	≥ Has the DVD-RW, DVD-R or DVD-R DL been finalized?
	>After finalizing, the discs become play-only and cannot
Cannot copy although	record. If you un-finalize a DVD-RW, it can be used for
	recording. (If you un-finalize a DVD-RW and then use it again
power is supplied to this
	when copying from a compatible Panasonic Camcorder, the
unit and the disc is
	recorded scenes may be deleted.)
correctly inserted.
	≥ Is the memory of the disc full?
	>If there is no more available memory, delete unnecessary
	scenes with the PC or use a new disc.

15

(ENG) LSQT1268