Panasonic TU-DST51 manual Programming Available Channels

GETTING STARTED

Step 8. Programming Available Channels

YOU MUST PERFORM THE AUTOMATIC CHANNEL PROGRAMMING BEFORE

MANUALLY ADDING AND DELETING CHANNELS BECAUSE OF THE DIGITAL TUNING SYSTEM USED BY THE STB. THIS METHOD WILL ENSURE THAT EVERY AVAILABLE CHANNEL IS CAPTURED AND STORED INTO MEMORY.

Automatic Channel Programming

The STB will scan for all available channels and store them in memory. The scan will normally take several minutes to complete.

Procedure

C3 In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all channels with a signal.

£3 Press the • arrow to select AUTO.

O Press the ACTION button to start the auto scan.

OPress the ACTION button to cancel the auto scan or exit back to SET UP Menu after the auto scan is complete.

[3 Press the • arrow once to exit back to Roller Guide.

Note: As more digital channels become available in your area, the AUTO feature must be selected to store the new digital channels into memory.

Manual Channel Programming

After programming all available channels, you can use the MANUAL feature to selectively add or delete channels.

Procedure

OIn SET UP Menu, select PROGRAM to choose MANUAL to manually add or delete channels.

£3 Press the • arrow twice to select MANUAL. O Press the ACTION button to edit channels.

Use the A, _ arrow buttons and numeric keypad to select a channel.

Use the 4 and • arrowbuttons to delete or add channels.

£3 Press the ACTION button to exit back to SET UP Menu. O Press the • arrow once to exit back to Roller Guide.

AUTOMANUAL

._' J/Ff Automatic Channel Programming

The AUTO feature must be selected first to ensure that all

available channels are captured and stored into memory.

[]