Panasonic TU-DST51 manual Troubleshooting

Page 63

TROUBLESHOOTING

Troubleshooting

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

If you are in doubt about some of the check points, or if the remedies indicated in the table do not solve the problem, consult your dealer or call 1.888-VIEW-PTV (843-9788) for assistance.

No power

No reception

Check that the AC power plug is securely plugged into the power outlet.

Check that equipment is connected properly.

Check that antenna is properly installed and oriented.

Check that the antenna or cable wire is connected properly.

i*Make sure the proper mode (antenna or cable) is selected.

 

Make sure your local cable provider is transmitting in 8VSB modulation

No digital cable

format.

 

 

 

 

•Make sure the proper cable mode is selected.

 

"Check

that

equipment

is connected properly.

 

•Check

if the

channel is available.

No picture

.Rerun

the Automatic

Channel Programming to make sure all available

channels are captured and stored into memory.

Rerun the Automatic Channel Programming to make sure all available

Available channels are missingchannels are captured and stored into memory.

Picture is distorted

.Make sure the proper display format is selected.

Make sure the proper aspect ratio is selected.

Make sure the Closed Caption feature is turned off.

Zoom aspect cannot be selected.Make sure the remote control is in DTV mode.

No sound

Check

that equipment is connected properly.

Wrong audio and Normal video

Check

audio is set to stereo, mono, not SAP.(NTSC mode only)

Check that the batteries are installed with the correct polarities (+ and -). •The batteries are depleted: Replace them with new ones.

Point the remote control unit at the remote control sensor and operate.

The remote control is not responding .Operate the remote control unit at a distance of not more than 23 feet (7

meters) from the remote control sensor.

Remove any obstacles between the remote control unit and remote control sensor.

The remote control is operational, but the STB is not responding

The remote control is operational, but other component(s) are not responding

"Check that the AC power prug is securely plugged into the power outlet.

.Make sure the STB is on.

Make sure the remote control is in DTV or NTSC mode.

Check that the AC power plug is securely plugged into the power outlet.

• Make sure the component(s) are on.

-Reprogram the remote control to make sure it is programmed properly to operate the component(s).

Make sure the remote control is in the proper component mode (i.e. TV, CBL, AUX, etc.).

[]

Image 63
Contents Page Contents Safety Instructions For Digital Television Decoder Safety InstructionsPER National Electrical Code NEC... p--WRE Safety InstructionsReceiving Digital Broadcasts Information on Digital TelevisionDigital Television Digital Broadcasting and Cable TVDigital Audio Digital Picture FormatsDTV-Compatible Monitor/Receiver Capability Audio/Visual FeaturesInformation on the Set-Top Box Panasonic Digital Set-Top Box model TU-DST51Customer Record Care and CleaningSpecifications CongratulationsSTB Location Connecting CablesAC Power Supply Cord Antenna Installation and OrientationAntenna/Cable Connection Button Front PanelPanasonic Rear PanelNext Program Tuning Channel and Program Tuning DTVChannel Tuning Using Certain Panasonic Televisions Channel and Program TuningProgram selected Channel Banner DTV modeChannel Banner FormatSTB Identification Number, Needed for Unavailable Channel Selection1080i1080i 720p720p 480p480p 480i480i Atsc Display FormatsDisplay Format Selection 480pLetbox Letterbox Aspect Aspect Ratio SelectionShrink Aspect Sidebar AspectExpand Aspect Aspect Ratio Formats Stereo Output Digital Interface for Panasonic D-VHS VCRDolby Digital AC-3 Audio External Dolby Decoder OptionalDTV-COMPATIBLE TV Setup Connect AC Power CordGetting Started Set-Top Box Connection to Conventional TV Oa0,osDTV-Compatible TV Digital TV/Standard TV Reception with DTV-Compatible TVDigital TV/Standard TV Reception with Conventional TV Digital TV/STANDARD TV Reception with Conventional TV SetupDigital TV/Cable Reception with DTV-Compatible TV DIGITALTV/CABLE Reception with DTV-COMPATIBLETV SetupOptional Cable Box Digital TV/CABLE Reception with Conventional TV SetupProcedure Digital TV/Cable Reception with Conventional TVDigital 8VSB Cable/Analog Cable with DTV-Compatible TV DTV Digital 8VSB Cable/Analog Cable with Conventional TVNtsc Analog Cable Connection Analog Cable Reception with Conventional Monitor SetupSwitching to DTV Mode Panasonic TV models Turning STB OnRoller Guide Menu TM Antenna/Cable Mode Action / Navigation ButtonRemote Action / Navigation Button Programming Available Channels Auto feature must be selected first to ensure that allPanasonic D-VHS VCR Setup Incoming signal from antenna or cableSet-Top Box Connection to Panasonic D-VHS VCR Set-Top Box Connection to VCR VCR SetupDolby Digital AC-3 Decoder Setup Optional ConneconsDTV-Compatlble TV Remote Control EUR511157Aspect Ratio Light Remote Control Functional Key ChartFunctional Key Chart PIP channeleearch StopFtP Skip/Search Fast Forward Incmeee Sound €o AUX Au9AUX Cassette Deck Aspect Ratio Selections Special Remote ButtonsZoom Sidebar Expand Full Letferbox Shrink Rapid Tuning O TV/Video CMenu Menu Programming the Remote Control Programming With CodeProgramming Without Code Component Codes 810O00 Lo010i25 SanqSony S4o Sony 740 Cable BoxReceiver or Amplifier Remote Action ! Navigation Button Roller Guide Menu TMGuide Feature Chart Roller Guide Feature Chart RollerIll Roller Guide Feature ChartSET UP Special FeaturesChannel Mapping Special Features DAY Time £3 In SET UP Menu, selectCC ClosedCaption Mode VHS PLAY Playing Command or Event Status MessageVHSreported error AnalogTapeTimer Special Features Ntsc Tuner Operations II Jlill.=. ul.l==U,1.,I dtoi Manual ProgramAntenna Source Audio Setup Troubleshooting If you ship the product Product InformationMake sure STB is on

TU-DST51 specifications

The Panasonic TU-DST51 is a high-performance digital receiver that was introduced to cater to the growing demand for digital television broadcasting. This device is highly regarded for its advanced features, user-friendly interface, and robust performance in delivering a seamless viewing experience.

One of the standout features of the TU-DST51 is its compatibility with both standard-definition and high-definition television signals. It supports the DVB-T and DVB-T2 standards, which allows users to access a wide array of channels. This makes it an excellent option for consumers looking to make the transition from analog to digital broadcasting, ensuring they do not miss out on quality programming.

The TU-DST51 is equipped with a digital tuner that provides superior reception quality. This tuner utilizes advanced signal processing technology that not only enhances audio and video clarity but also allows for improved reception in challenging environments. This means that viewers can enjoy a clear and stable picture even in areas with weak signal strength.

Another notable characteristic of the TU-DST51 is its integrated electronic program guide (EPG). This feature allows viewers to easily navigate through channels and discover upcoming shows. The EPG displays program information and allows users to set reminders for their favorite programs, thus enhancing the overall viewing experience.

The unit includes HDMI output, which enables a simple one-cable connection to high-definition televisions, ensuring optimal picture quality. Furthermore, the TU-DST51 is designed with multiple connectivity options, including composite video and optical audio outputs, making it easy to integrate into different home entertainment setups.

User-friendliness is also a key attribute of the TU-DST51. The remote control is intuitive, with clearly labeled buttons that simplify navigation. The on-screen menus are straightforward, allowing both tech-savvy and less experienced users to enjoy the full range of capabilities without confusion.

Panasonic also emphasizes energy efficiency with the TU-DST51. The device consumes minimal power, which is a significant consideration for environmentally conscious consumers. This ensures that users can enjoy quality television while minimizing their carbon footprint.

Overall, the Panasonic TU-DST51 combines advanced technology with user-friendly features, making it an excellent choice for consumers seeking a reliable digital receiver. Its ability to deliver high-quality signals, coupled with advanced navigation features and energy efficiency, positions the TU-DST51 as a standout option in the digital television market.