REMOTE CONTROL OPERATION (MODELS
Programming the Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.
Default Modes for Remote Control
Programming without a Code
This procedure searches all codes and is called the “sequence method.”
Procedure
•Confirm that the external component is plugged in and on.
•Turn the component off.
ACTION
Device
TV
CABLE
DBS
VCR DVD/CD
AUX
RCVR
Operates
TV (Panasonic Only)
DTV (Panasonic Only)
CABLE (Preset)
DBS (Preset)
VCR (Preset0
DVD and CD (Preset)
Personal Video Recorders,
Tape and VCR2
Audio receiver (Preset)
Default
Panasonic TV Code
Panasonic DBS Code
Panasonic CABLE
Code
Panasonic DBS Code
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video Recorder Code
Panasonic RCVR code
•Press 
and POWER together, for at least 5 seconds.
•Press appropriate component button on the Remote Control.
•Press VOL u to move forward to the next code. Presst VOL to move backward.
•Press the Remote Control POWER to test the
component. If the procedure was successful, the component will turn on.
Note: Repeat the above steps until the component code is found. it may take many attempts before the correct
ENGLISH
Note: Determine the manufacturer of the component and look in the table for the code.
Programming with a Code
Procedure
•Confirm that the external component is plugged and operating.
•Turn the component off.
ACTION
•Press 
and POWER together, for at least 5 seconds.
•Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV, CABLE or DBS.
•Enter the
•Press the Remote Control POWER to test the
component. If the procedure was successful, the component will turnon.
Note: If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.
code is found.
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all the features found in each model.
Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.
| VCR |
|
| DVD |
|
| DVD (CD) | |||||||||
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUX (VCR2) |
| AUX (TAPE) |
| RECEIVER | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CABLE |
|
| DBS |
| AUX (PVR) | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17•