Amplifier Connection to Audio AMP | Panasonic CT 32HL43 specs

ENGLISH

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections (cont.)

VCR and Cable Box Connection (Cont.)

Note: Models CT-32HC43, CT-36HC43 and CT-32HXC43 do not have DIGITAL INPUT.

Recording a premium (scrambled) cable channel Procedure

•Select ANT2 in the SET UP menu.

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Turn the VCR ON.

•Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.

•Using your cable box, tune to the premium cable channel you want to record.

•Begin recording.

rTo view a different channel while recording:

•Select ANT1 in the SET UP menu.

•Press the TV/VIDEO button on the remote control to TV mode.

•Tune the television to a program (except another premium cable channel).

Amplifier Connection (TO AUDIO AMP)

To listen the audio through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television.

Note: TO AUDIO AMP terminals cannot be connected directly to externalspeakers.

Audio Adjustments

•Select SPEAKERS ON located in the onscreen AUDIO menu.

•Set amplifier volume to minimum.

•Adjust television volume to desired level.

•Adjust amplifier volume to match the television.

•Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.

•Volume, mute, bass, treble and balance are now controlled through the television.

Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.

Digital TV - Set-Top Box (DTV-STB) or DVD Connection

This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV tuner set-top-box (STB). In order to view DTV programming, the STV must be connected to the component video inputs (Y,PB,PR) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.

This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures.

Use this diagram to connect the DTV-STB (Digital TV Set-Top- Box) or DVD player to the back of

Front Control Panel

The front control panel can be used to access menus and switch video mode when the remote control is not available.

Note: The ON/OFF indicator LED (red) will be lit when set is on.

A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the video inputs. See the optional equipmentmanual for details.

Procedure

•Connect equipment to front Audio/Video input jacks.

•Press TV/VIDEO button to select VIDEO 4 input mode.

•Operate optional equipment as instructed in equipment manual.

6•