DVI Digital Visual Interface input connection

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

(for models CT-32HL43 and CT-36HL43 only)

The DVI/HDCP1 input on your TV can accommodate copy protected digital programming. The DVI/HDCP input

terminal complies with the EIA-861Profiles2standard and is not intended for use with personal computers. The DVI/ HDCP input can be connected to an EIA/CEA 861 compliant consumer electronic device, such as a set top box or DVD player equipped with a DVI output connection3. The DVI/HDCP input is designed for best performance with HDTV signals, such as 1080i. The DVI/HDCP input will also accept and display 480i and 480p picture signals.

Notes:

1.DVI/HDCP = Digital Visual Interface / High-Bandwidth Digital Copy Protection.

2.EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

3.Consult your consumer electronics dealer for availability details.

Follow the diagram below to connect the TV to a set top box or a DVD player.

Procedure

•Press TV/VIDEO button on the remote control to select DIGITAL-IN input.

•Connect the DVI output from the set top box or a DVD player to the DVI input on the back of the TV.

•Connect the Audio Out signal from the set top box or DVD player to the Audio In input associated with the

DIGITAL INPUT.

Note: This HDTV Monitor is not intended to be used with a PC.

OPTIONAL EQUIPMENT CONNECTIONS

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television.

Note: If the Main Picture signal is Component Video Input, no Program out signal will be available..

TERMINALS ON BACK OF TV

MONITOR VCR

O R

CABLES NOT SUPPLIED

Procedure

•Connect optional equipment to PROG OUT a ndTO AUDIO AMP terminals.

•PROG OUT terminal display is the same as on-screen display.

•See optional equipment manual for further instructions for recording and monitoring.

Special Remote Buttons

ASPECT Button

The ASPECT button on the remote control lets you select the picture size ratio to match programming format when using DTV STB or DBS.

BBE Button

Press this button to turn the BBE VIVA 3D feature (available in CT-36HL43 and CT-32HL43 only) or BBE® sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes. If you are receiving a stereo program and you press the SAP button, you can cycle between STEREO and MONO.

ENGLISH

7•