Pelco P specific functionality
Manual proportional control of pan/tilt and zoom/focus/iris
Support for preset 1 – 64 (preset 33 should not be used as this is a special Pelco preset) The dome menu can be displayed using the conventional key strokes used to access dome menus from the Panasonic controller. Please refer to the Panasonic manual for this information.
Once the dome menu is displayed the joystick is used to navigate the cursor and the CAM or ENTER key is used to simulate the Pelco IRIS OPEN key.
When navigating the dome menu you must wait for approx 2 seconds between repeated ENTER key presses to allow control with the HD316 DVR range.
Once EXIT is selected from the dome menu you must perform a camera “setup off” from the Panasonic controller otherwise pan/tilt control will be slow and fixed speed.
Panasonic Protocol Converter Manual V10.2 5Mar 09 | Page 10/16 |