VCL TP protocol, Function Panasonic Procedure

VCL TP protocol

Function	Panasonic Procedure
Program preset 1 – 32	As normal
Goto preset 1 – 32	As normal
Enable Privacy zone 100 – 127	Program preset 64
	Followed by goto preset 1 – 28 (1 = zone 100)
Disable Privacy zone 100 – 127	Program preset 63
	Followed by goto preset 1 – 28 (1 = zone 100)
Define Preset Patrol – START	Program preset 62
	Followed by 3 preset commands per preset position
	PRESET NUMBER - GOTO PRESET 1-32
	SPEED - GOTO PRESET 1-63, 64 = fastest
	DWELL – GOTO PRESET 1-64 (x 2 seconds)
Define Preset Patrol – STOP	Program preset 61
Start Preset Patrol	AUTOPAN
Path 5 LEARN start	PATROL LEARN or Program preset 60
	Use joystick to move dome around required path
Path 5 LEARN stop	PATROL STOP or Program preset 59
Path 5 PLAYBACK	PATROL PLAY

The unit supports 32 preset positions per dome. Use the standard Panasonic method to program a preset and also to goto preset.

The dome’s preset tour 1 can be defined as follows

PROGRAM PRESET 62 : the converter is now waiting for 3 preset calls per position

GOTO PRESET 1-32 : this is the preset position that is being programmed

GOTO PRESET 1-64 : this is the speed, 1-63 are increasing speeds and 64 is maximum

GOTO PRESET 1-64 : this is the dwell in 2 seconds to stay at the preset position

PROGRAM PRESET 61 : this is the end of the tour definition

Example presets 1,2,8,16

PROGRAM PRESET 62 – start definition

GOTO PRESET 1 – preset position 1

GOTO PRESET 64 – maximum speed

GOTO PRESET 10 – 20 second dwell

GOTO PRESET 2 – preset position 2

GOTO PRESET 20 – slowish speed

GOTO PRESET 15 – 30 second dwell

GOTO PRESET 8 – preset position 8

GOTO PRESET 1 – very slow speed

GOTO PRESET 2 – 4 second dwell

GOTO PRESET 16 – preset position 16

GOTO PRESET 63 – fast speed

GOTO PRESET 1 – 2 second dwell

PROGRAM PRESET 61 – end definition

Panasonic Protocol Converter Manual V10.2 5Mar 09

Page 8/16