Klark Teknik DN530 specifications Rear Panel, Mains input, Channels

Page 29
Mains IEC socket
Fuse drawer

Chapter 5: Rear Panel

The rear panel of the DN530 (shown below) has three main connector sections: mains input, solo bus and the four channels.

Mains input

Solo bus

Four channels

Mains input

The mains input section has a mains IEC socket, below which is a fuse drawer. Printed to the right are mains supply voltage and fuse details.

The mains input is an auto-voltage sensing switch mode power supply that operates where normal mains voltage is in the range 100V AC to 240V AC.

The fuse drawer houses the mains fuse at the rear of a two-compartment drawer. The front compartment

provides room for a spare. Always replace the mains fuse with one of the same type and rating, as printed to the right of the fuse drawer.

Channels

There are four similar channel sections on the rear of the DN530. Each section comprises an input and an output XLR chassis connector, and a 1/4” TRS connector. These are used for connecting to external line level signals, such as a mixing console’s insert connections.

External

sidechain input (1/4” TRS jack)

Input (female XLR connector)

Output

(male XLR connector)

DN530

 

Operator Manual

17

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DN530 Page Important Safety Instructions Instructions DE Sécurité Importantes Klark Teknik Page Safety warnings PrecautionsGeneral precautions PowerLocation InstallationAudio connections Radio frequency interferenceOptional equipment Safety equipmentSpecial accessories Precautions Contents Contents Overview of the DN530 IntroductionIntroduction ApplicationsAbout this manual FeaturesFeatures Introduction Principles of gate operation What Is a Gate?Typical creative uses What Is a Gate?Other uses of gating Other uses of gatingUnwanted side effects What Is a Gate? Checking the mains fuse Getting StartedUnpacking Getting Started Connecting the power cableConnecting the audio cables Sidechain inputs Connecting the audio cablesConnecting to unbalanced equipment Powering the unitDescription Front PanelFront Panel Gate sectionMetering Gate sectionEXT Sidechain sectionChannels Rear PanelMains input Rear Panel Solo busGate Control Functions Gate Control Functions Intelligent threshold shift i-TSSidechain Using The GateBasic gate operation Typical set up for external sidechain operation Using The GateSoloing SoloingInterfacing with the console Using gates with compressors Using gates with compressorsInstrument synchronisation Removal of background noise from electronic sources Appendix a Application NotesDrums and percussive instruments Transient accentuationApplication Notes Music PAConference PA Envelope shaping Envelope shapingGating vocals False triggering ChatterClicking Ducking Noise enhancementDe-essing Noise enhancementApplication Notes Inputs Four Appendix B Technical SpecificationGate Technical SpecificationAppendix C Functional Block Diagram DN530 Functional Block DiagramAppendix D Balanced/Unbalanced Audio Balanced/Unbalanced Audio Appendix E Crib Sheet Crib Sheet Routine maintenance Appendix F Service InformationCleaning Replacing the mains fuseEquipment disposal Service Information

DN530 specifications

The Klark Teknik DN530 is a versatile and powerful dynamic range compressor, designed to meet the demands of both music production and live sound engineering. Renowned for its high-quality audio processing capabilities, the DN530 offers a wide array of features that benefit professionals in various audio applications.

One of the standout features of the DN530 is its dual-channel compressor design. This allows users to process two separate audio signals simultaneously, making it an ideal choice for stereo applications. The compressor utilizes advanced VCA technology, which ensures consistent dynamic control while maintaining the natural character of the audio. This technology provides a transparent sound, making it suitable for a variety of instruments, vocals, and other audio sources.

The DN530 offers comprehensive control over compression parameters, including threshold, ratio, attack, and release. The threshold determines the level at which compression begins, while the ratio defines the degree of compression applied to signals exceeding the threshold. Users can manipulate the attack and release settings to shape the compressor's response to the audio signal, allowing for greater flexibility in achieving the desired sound.

Another key characteristic of the DN530 is its sidechain feature. This allows users to introduce external audio signals to control the compression applied to the primary signal. This function is particularly useful for dynamic ducking effects, such as reducing the volume of background music when a vocal is present or achieving a pumping effect in dance music.

The DN530 also includes an innovative metering system, featuring LED indicators that provide clear visual feedback on signal levels, gain reduction, and other important parameters. This enhances the user experience, allowing sound engineers to make informed adjustments quickly and efficiently.

Built with rugged construction, the DN530 is designed to withstand the rigors of live performance environments. Its sturdy chassis and reliable components ensure longevity and durability, making it a trusted addition to any professional audio setup.

In summary, the Klark Teknik DN530 is a feature-rich dynamic range compressor that excels in both studio and live sound scenarios. With its dual-channel capability, advanced VCA technology, comprehensive control over compression parameters, sidechain functionality, and robust build quality, it stands out as a top choice for audio professionals seeking to enhance their sound processing capabilities.
Top Page Image Contents