Klark Teknik DN530 specifications Interfacing with the console

Page 36

Chapter 7: Using The Gate

Interfacing with the console

The DN530 is optimised for use at line level, therefore to gate a mic, the input to the DN530 has to be taken from the console, preferably from the channel insert point send. The output from the DN530 comes back to the channel insert return. By connecting the DN530 at this position in the signal chain, its operation is unaffected by the use of any of the console controls, except input gain.

DN530 (rear panel)

Female XLR

connector

Mic	Channel insert point	Input

Send

Return

Mic inputs

Male XLR connector

Output

Console

An alternative is to connect to the group insert point of the console. This is useful when many inputs are mixed down to a smaller number of outputs. A given number of gates can achieve a greater coverage.

	DN530
24	Operator Manual

Image 36

Contents DN530 Page Important Safety Instructions Instructions DE Sécurité Importantes Klark Teknik Page Precautions Safety warningsGeneral precautions PowerInstallation LocationAudio connections Radio frequency interferenceSafety equipment Special accessoriesOptional equipment Precautions Contents Contents Introduction Overview of the DN530Applications IntroductionFeatures FeaturesAbout this manual Introduction What Is a Gate? Principles of gate operationWhat Is a Gate? Typical creative usesOther uses of gating Unwanted side effectsOther uses of gating What Is a Gate? Getting Started UnpackingChecking the mains fuse Connecting the power cable Connecting the audio cablesGetting Started Connecting the audio cables Sidechain inputsPowering the unit Connecting to unbalanced equipmentFront Panel DescriptionGate section Front PanelGate section MeteringSidechain section EXTRear Panel Mains inputChannels Solo bus Rear PanelGate Control Functions Intelligent threshold shift i-TS Gate Control FunctionsUsing The Gate Basic gate operationSidechain Using The Gate Typical set up for external sidechain operationSoloing SoloingInterfacing with the console Using gates with compressors Using gates with compressorsInstrument synchronisation Appendix a Application Notes Removal of background noise from electronic sourcesDrums and percussive instruments Transient accentuationMusic PA Conference PAApplication Notes Envelope shaping Gating vocalsEnvelope shaping Chatter ClickingFalse triggering Noise enhancement DuckingDe-essing Noise enhancementApplication Notes Appendix B Technical Specification Inputs FourTechnical Specification GateAppendix C Functional Block Diagram Functional Block Diagram DN530Appendix D Balanced/Unbalanced Audio Balanced/Unbalanced Audio Appendix E Crib Sheet Crib Sheet Appendix F Service Information Routine maintenanceCleaning Replacing the mains fuseService Information Equipment disposal

DN530 specifications

The Klark Teknik DN530 is a versatile and powerful dynamic range compressor, designed to meet the demands of both music production and live sound engineering. Renowned for its high-quality audio processing capabilities, the DN530 offers a wide array of features that benefit professionals in various audio applications.

One of the standout features of the DN530 is its dual-channel compressor design. This allows users to process two separate audio signals simultaneously, making it an ideal choice for stereo applications. The compressor utilizes advanced VCA technology, which ensures consistent dynamic control while maintaining the natural character of the audio. This technology provides a transparent sound, making it suitable for a variety of instruments, vocals, and other audio sources.

The DN530 offers comprehensive control over compression parameters, including threshold, ratio, attack, and release. The threshold determines the level at which compression begins, while the ratio defines the degree of compression applied to signals exceeding the threshold. Users can manipulate the attack and release settings to shape the compressor's response to the audio signal, allowing for greater flexibility in achieving the desired sound.

Another key characteristic of the DN530 is its sidechain feature. This allows users to introduce external audio signals to control the compression applied to the primary signal. This function is particularly useful for dynamic ducking effects, such as reducing the volume of background music when a vocal is present or achieving a pumping effect in dance music.

The DN530 also includes an innovative metering system, featuring LED indicators that provide clear visual feedback on signal levels, gain reduction, and other important parameters. This enhances the user experience, allowing sound engineers to make informed adjustments quickly and efficiently.

Built with rugged construction, the DN530 is designed to withstand the rigors of live performance environments. Its sturdy chassis and reliable components ensure longevity and durability, making it a trusted addition to any professional audio setup.

In summary, the Klark Teknik DN530 is a feature-rich dynamic range compressor that excels in both studio and live sound scenarios. With its dual-channel capability, advanced VCA technology, comprehensive control over compression parameters, sidechain functionality, and robust build quality, it stands out as a top choice for audio professionals seeking to enhance their sound processing capabilities.