Klark Teknik DN530 specifications Using gates with compressors

Page 37

Using gates with compressors

Using gates with compressors

One of the most important applications of a noise gate is the reduction of noise emphasised by the action of compressors. When any signal is compressed, the highest levels are reduced, but the lowest noise levels remain the same. This effectively decreases the signal to noise ratio. By gating the signal before it enters the compressor (as shown in the following diagram), the noise can be eliminated before it has chance to be exaggerated by the compressor action.

Compressor

(for example, a DN540 Creative Quad Comp)

Mic

Female XLR

connector

DN530 (rear panel)

Channel insert point

Male XLR connector

Output

Return

 

 

 

 

 

 

 

 

 

 

 

Send

 

Mic inputs

 

 

 

 

 

 

 

 

 

 

Console

Some engineers prefer to connect the gate after the compressor. This reduces any slight noise produced by the compressor itself, but since the dynamic range of the signal is less when it leaves the compressor, setting the correct threshold level may take a little longer. Alternatively, the uncompressed signal may be paralleled to the external sidechain input; this external sidechain can then be used to trigger the gate.

DN530

 

Operator Manual

25

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DN530 Page Important Safety Instructions Instructions DE Sécurité Importantes Klark Teknik Page Safety warnings PrecautionsGeneral precautions PowerLocation InstallationAudio connections Radio frequency interferenceSpecial accessories Safety equipmentOptional equipment Precautions Contents Contents Overview of the DN530 IntroductionIntroduction ApplicationsFeatures FeaturesAbout this manual Introduction Principles of gate operation What Is a Gate?Typical creative uses What Is a Gate?Unwanted side effects Other uses of gatingOther uses of gating What Is a Gate? Unpacking Getting StartedChecking the mains fuse Connecting the audio cables Connecting the power cableGetting Started Sidechain inputs Connecting the audio cablesConnecting to unbalanced equipment Powering the unitDescription Front PanelFront Panel Gate sectionMetering Gate sectionEXT Sidechain sectionMains input Rear PanelChannels Rear Panel Solo busGate Control Functions Gate Control Functions Intelligent threshold shift i-TSBasic gate operation Using The GateSidechain Typical set up for external sidechain operation Using The GateSoloing SoloingInterfacing with the console Using gates with compressors Using gates with compressorsInstrument synchronisation Removal of background noise from electronic sources Appendix a Application NotesDrums and percussive instruments Transient accentuationConference PA Music PAApplication Notes Gating vocals Envelope shapingEnvelope shaping Clicking ChatterFalse triggering Ducking Noise enhancementDe-essing Noise enhancementApplication Notes Inputs Four Appendix B Technical SpecificationGate Technical SpecificationAppendix C Functional Block Diagram DN530 Functional Block DiagramAppendix D Balanced/Unbalanced Audio Balanced/Unbalanced Audio Appendix E Crib Sheet Crib Sheet Routine maintenance Appendix F Service InformationCleaning Replacing the mains fuseEquipment disposal Service Information

DN530 specifications

The Klark Teknik DN530 is a versatile and powerful dynamic range compressor, designed to meet the demands of both music production and live sound engineering. Renowned for its high-quality audio processing capabilities, the DN530 offers a wide array of features that benefit professionals in various audio applications.

One of the standout features of the DN530 is its dual-channel compressor design. This allows users to process two separate audio signals simultaneously, making it an ideal choice for stereo applications. The compressor utilizes advanced VCA technology, which ensures consistent dynamic control while maintaining the natural character of the audio. This technology provides a transparent sound, making it suitable for a variety of instruments, vocals, and other audio sources.

The DN530 offers comprehensive control over compression parameters, including threshold, ratio, attack, and release. The threshold determines the level at which compression begins, while the ratio defines the degree of compression applied to signals exceeding the threshold. Users can manipulate the attack and release settings to shape the compressor's response to the audio signal, allowing for greater flexibility in achieving the desired sound.

Another key characteristic of the DN530 is its sidechain feature. This allows users to introduce external audio signals to control the compression applied to the primary signal. This function is particularly useful for dynamic ducking effects, such as reducing the volume of background music when a vocal is present or achieving a pumping effect in dance music.

The DN530 also includes an innovative metering system, featuring LED indicators that provide clear visual feedback on signal levels, gain reduction, and other important parameters. This enhances the user experience, allowing sound engineers to make informed adjustments quickly and efficiently.

Built with rugged construction, the DN530 is designed to withstand the rigors of live performance environments. Its sturdy chassis and reliable components ensure longevity and durability, making it a trusted addition to any professional audio setup.

In summary, the Klark Teknik DN530 is a feature-rich dynamic range compressor that excels in both studio and live sound scenarios. With its dual-channel capability, advanced VCA technology, comprehensive control over compression parameters, sidechain functionality, and robust build quality, it stands out as a top choice for audio professionals seeking to enhance their sound processing capabilities.
Top Page Image Contents