Basic Controls
<Top Side Controls>
POWER | TV/VIDEO VOLUME | CHANNEL |
TV/VIDEO button
| Volume Up/Down |
Main POWER switch | Channel Up/Down |
Press to turn the TV’s main power on/off. (see page 9)
POWER button
Press to turn the TV on or off. (see page 9)
Note:
This does not work when the main power is off (No light).
TV/VIDEO button
Press to change the input mode.
TV | VIDEO1 | VIDEO2 |
COMPONENT
Remote control sensor
Within about 20 feet (6 meters) in front of the
TV set.
MUTE button
Press to mute the sound. Press again to cancel mute.
Mute is canceled when the power is turned off or volume level is changed.
ASPECT button
(see page 22)
SLEEP button
Set the sleep time to turn the TV into standby mode.
30 | 60 | 90 |
0
SAP button
Press to select the audio mode. You can also change the mode in the MENU screen (see page 21).
STEREO SAP MONO
MENU button
(see page 10)
RETURN button
Press to return to the previous screen.
Numbered buttons 
R-TUNE button 
Press to switch to previously viewed channel or video mode.
Not effective under the following conditions:
1.Right after the TV is turned on.
2.After switching TV / CATV (MODE in
PROGRAM CHANNELS).
3.Right after the ACP (Automatic channel programming) execution.
4.When the same channel as the present channel is selected.
•When 3 minutes left, “ 
3 ” will flash. (“2” for 2 minutes and “1” for 1 minute).
•The SLEEP timer is cancelled when the power is turned off.
Channel up
Moves cursor upward during menu mode.
Reduces volume | Increases volume |
Moves cursor to | Moves cursor to |
the left during | the right during |
menu mode. | menu mode. |
Channel down
Moves cursor downward during menu mode.
RECALL button
Press to display channel number, sleep timer and other options.
12