Panasonic ST50D Displaying PC Screen on TV, Select the external input Select PC, PC menu setting

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected.

●To connect PC (p. 80)

1Select the external input

2Select [PC]

Input Selection

AV1

AV2

PC

HDMI1

HDMI2

HDMI3

TV

SD Card/USB

select access

●Corresponding signals (p. 90)

●If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported.

Displaying PC Screen on TV

PC menu setting

●To make settings “How to Use Menu Functions” (p. 38)

Menu	Item	Adjustments / Configurations (alternatives)
		Switches to a wide view:
	Input Resolution	VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1,024 × 768 pixels) /
		WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
		●Options change depending on signals

	Clock	Set to the minimum level if noise occurs
		Adjusts horizontal position
	H-pos
Setup	PCSetup	Adjusts vertical position
	V-pos
		Eliminates flicker and distortion
	Clock Phase	●Adjust after Clock adjustment

●Set to the minimum level if noise occurs

	Chooses another synchronous signal if the image is distorted [H & V] / [On
Sync	Green]
	[H & V]: by the horizontal and vertical signals from your PC
	[On Green]: by the green signal from your PC (if available)
Reset to Defaults	Press the OK button to reset [PC Setup] to the default settings

●Other items (p. 39 - 44, 51)

Note

●For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable

(p. 88).

50