Prepare the plasma TV | Panasonic TY-WK42PR2W manual

4. Prepare the plasma TV

Fit the insulation spacers to the plasma TV.

Place the plasma TV unit face down on a blanket or other soft cloth that is clean and free of debris, and follow the procedure below.

(1)Remove the terminal cover on the plasma TV (PA30, PE30, PV30 series only).

	(2) Using a flathead screwdriver, remove the four	Flathead screwdriver
	caps from the plasma TV.	Flathead screwdriver
	caps from the plasma TV.
	* Carefully retain the removed terminal cover and
	caps in a safe place. (They will be needed again
	later should it be required to use the special- Caps
	purpose stand or standalone stand.)
	(3) Using the included Allen wrench, fit the included
	Allen head countersunk screws, dished tooth
	washers and insulation spacers (4 sets) into the
	holes from where the caps were removed. (See

	the diagram at right.)
	Allen head countersunk screw	Terminal
	Allen head countersunk screw	cover
	Dished toothed washer	cover
	Dished toothed washer
	Insulation spacer
	Allen wrench

5.Attaching the plasma TV to the wall-hanging bracket and connecting the wiring

English

(1)	Remove the red screws for open/close fastening (one
(2)	each on the left and right) .
(2)	Hook the insulation spacers on the top of the plasma TV

Top insulation spacer

1Red screw for open / close fastening

	over the notches on the bracket, and allow the TV to
(3)	hang from the bracket.
(3)	Pull the plasma TV body forward, as shown in the diagram at
(4)	right, and connect the wiring.
(4)	After wiring is finished, slightly raise the plasma TV and
	insert the insulation spacers at the lower back into the
(5)	holes at the base of the wall-hanging bracket.
(5)	Lower the plasma TV into place.

Notes • If the plasma TV is raised too far, there is a risk it may become unhooked from the top of the bracket.

•Do not hold the front panel of a PA30, PE30, PV30 Series plasma TV at the bottom.

Top notch

Lower hole

Wall
surface	4
	4
	5

Wall surface

Lower insulation spacer

* Do not hold the bottom of the front panel.

6.Fastening the plasma TV

(1)Fit the included fastening screws in the indicated holes at the sides of the wall-hanging bracket (left and right).

(2)Securely refit the red screws for open/close fastening

(one each on the left and right) in the indicated holes on the sides of the wall-hanging bracket.

Note • Be sure to fit the fastening screws on the left and right to keep the plasma TV from falling

7.Removal of plasma TV unit

(1)Remove the screws for unit fastening (1 each on the left and right) that are fitted to the wall- hanging bracket sides.

(2)While lifting the bottom of the plasma TV unit, pull it towards yourself.

(3)When the lower insulation spacers are freed, keep lifting upward.

off the wall-hanging bracket.

		1 Red screw for
		open/close fastening
	Wall	Wall-hanging bracket
Hole for red	Wall
Hole for red	surface
screw for	surface	Fastening screw
open / close		Fastening screw
open / close		fitting position
fastening		fitting position
fastening
		Plasma TV
		fastening screw

Wall surface

(1)Screw for plasma TV unit fastening

(3)

Wallsurface

(2) Insulation spacer

TY-WK42PR2W specifications

The Panasonic TY-WK42PR2W is a sophisticated and versatile television stand designed specifically to enhance the viewing experience for various Panasonic Viera TV models. As a premium accessory, it integrates seamlessly with the aesthetic of modern living rooms while offering functionality that meets the demands of contemporary multimedia lifestyles.

One of the standout features of the TY-WK42PR2W is its robust construction, designed to support larger TV screens with stability and strength. This stand can accommodate flat-screen TVs up to 42 inches, making it an excellent choice for consumers looking to enhance their home viewing experiences without compromising on style. The stand’s weight distribution and base design ensure a lower center of gravity, providing security for both the TV and any additional devices placed on its shelves.

The design of the TY-WK42PR2W stands out due to its sleek, minimalist aesthetic, effortlessly fitting into any décor. The stand is finished in an elegant black or white color, allowing it to match a variety of interior styles while maintaining a low profile that won’t overwhelm the space.

From a technological perspective, the TY-WK42PR2W incorporates cable management features, helping to keep cords and cables organized and out of sight. This not only contributes to a cleaner look but also enhances safety by reducing tripping hazards. The stand is also equipped with adjustable shelving that can be tailored to fit different media devices, such as gaming consoles, Blu-ray players, and sound systems, ensuring that everything is neatly housed in one location.

Another characteristic worth noting is the easy assembly process that the TY-WK42PR2W offers. The stand comes with clear instructions and all necessary hardware, allowing consumers to set it up swiftly without requiring professional help.

In conclusion, the Panasonic TY-WK42PR2W is not just a functional stand but a stylish solution for anyone looking to enhance their TV viewing experience. Its sturdy build, sleek design, adjustable shelving, and practical cable management features make it an excellent investment for any home entertainment setup, ensuring that your Panasonic Viera TV is displayed beautifully and safely.