Attaching the pedestal to TV
■Assembling the pedestal
Fix securely with assembly screws A (Total 4 screws).
Tighten screws firmly.
A
Bracket
Front 
Make sure that the bracket is anchored before fixing the screws.
Base(Image)
Accessories
Assembly screws (4 of each)
A
XSS5+15FNK size (M5 x 15)
B
XYN4+F25FJK size (M4 × 25)
Tighten assembly screws B (total 4 screws) loosely at first, then tighten them firmly to fix securely.
Rear view
Rear side | B |
Bracket (1)
TBL5ZA32821
Base (1)
Arrow mark 
Base
(Image)
Arrow mark
Hole for pedestal installation
bracket
Work on a flat surface
TBL5ZX0270 (for 47”) TBL5ZX03841 (for 55”)
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws B from the TV.
Lift the TV from the pedestal.
Remove the assembly screws A from the bracket.
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (above)
Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.
9