Using On-Screen Menus
Menus
Video Output Mode
With HDMI connection (When “Video Output” is set to “On”) (➜ page 21, “HDMI” tab)
Video recordings will be converted to, and output as, high definition video.The picture quality will vary depending on the connected equipment. Choose the picture quality to your preference.
480p/576p (progressive)§
720p (progressive)
1080i (interlace)
≥“¢” will be displayed next to those video outputs possible with the connected equipment. Selecting an item without “¢” can result in the picture being distorted.
Should the picture be distorted, press and hold [CANCEL] until the picture is displayed correctly.
The setting will return to “480p” or “576p”.
≥Output from the COMPONENT VIDEO OUT terminal will be “480p” or “576p”.
With HDMI connection (When “Video Output” is set to “Off”) (➜ page 21, “HDMI” tab) or other connections
480i/576i (interlace)§ 480p/576p (progressive)§
When you select “480p” or “576p” and a confirmation screen appears, select “Yes” only if connecting to a progressive output compatible television.
When you select “Auto” the constructing method of the DivX contents is automatically distinguished and output. If the picture is
Source Select distorted, select “I (Interlace)” or “P (Progressive)” depending on
[DivX] | which constructing method was used when the contents were | ||
| recorded to disc. |
| |
| Auto | I (Interlace) | P (Progressive) |
With HDMI connection (When “Video Output” is set to “On”) HD Picture (➜ page 21, “HDMI” tab)
Enhancer Makes the quality of HDMI video output(720p,1080i) sharp. Off, 1(weakest) to 3 (strongest)
With HDMI connection (When “Video Output” is set to “On”) (➜ page 21, “HDMI” tab)
The picture quality will vary depending on the connected
HDMI Colour | equipment. Choose the picture quality to your preference. | |||
Space | Should one of the items below not be possible with the connected | |||
equipment it will not be displayed. | ||||
| ||||
| RGB | YCbCr (4:4:4) | YCbCr (4:2:2) | |
≥“RGB Range” (➜ page 21, “HDMI” tab) is available when “RGB” is selected.
∫Audio Menu
Night Sound | (➜ page 11) |
Mode |
|
|
|
H.Bass | (➜ page 11) |
Using On-Screen
RQT8519
18
If you have chosen “480p”, “576p”, “720p” or “1080i” (➜ above), select the method of conversion to suit the type of material.
≥When the tray is opened, the setting will return to Auto or Auto1.
| When playing PAL discs, MPEG4 or DivX video contents | |
| Auto: | Automatically detects the film and video content, and |
|
| appropriately converts it. |
| Video: Select when using Auto, and the content is distorted. | |
Transfer | Cinema: Select this if the edges of the film content | |
| appear jagged or rough when Auto is | |
Mode |
| selected. |
|
| However, if the video content is distorted |
as shown in the illustration to the right, then select Auto.
When playing NTSC discs
Auto1 (normal): Automatically detects the film and video content, and appropriately converts it.
Auto2: In addition to Auto1, automatically detects film contents with different frame rates and appropriately converts it.
Video: Select when using Auto1 and Auto2, and the content is distorted.
Advanced | (➜ page 12) |
Surround |
|
|
|
| To make the dialogue in movies easier to hear |
Dialogue | |
with the dialogue recorded in the center channel) | |
Enhancer | [DivX] (Dolby Digital, |
| the center channel) |
|
Multi Re-master (➜ page 12)
§480i, 480p : When playing NTSC discs
576i, 576p : When playing PAL discs