Panasonic DVD-S52 Using On-Screen Menus, Display Menu, Other Menu, Confirming Hdmi information

	You can enjoy comfortable, analog-like sound.
	[DVD-VR][DVD-V](Discs recorded with 48 kHz only)
	[DVD-A](Discs recorded with 44.1 kHz and 48 kHz only)
Sound	[VCD] [CD]
	[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz or 32 kHz)
Enhancement	On ,------. Off
	≥This does not work when Night Sound Mode, H.Bass (➜ page 11),
	Advanced Surround or Multi Re-master (➜ page 12) is on.
	≥This may not work depending on the disc’s recording.
	≥This does not work with [MP3] on DVD-RAM or DVD-R/RW.
Attenuator	With 2ch or 5.1ch AUDIO OUT connections (➜ page 6, 8)
	Switch on if sound is distorted.
	On ,------. Off

∫Display Menu

Information	On ,------. Off
Subtitle Position	0 to s60 (in 2 units)
Subtitle Brightness	Auto, 0 to s7

	To select how to show images made for 4:3 aspect screens on a
	16:9 aspect television
4:3	Normal: Laterally stretches images.
	Auto:	The standard setting is “Shrink”. However, this automatically
Aspect
		changes to “Zoom” with a letterbox picture.
	Shrink: Images appear in the center of the screen.
	Zoom: Expands to 4:3 aspect ratio.
Just Fit Zoom			(➜ page 13, Zoom)
Manual Zoom			(➜ page 13, Zoom)
Bit Rate Display			Motion pictures	On ,------. Off
GUI See-through			Off, On, Auto (Switches on automatically when the
			images appear on the display.)
GUI Brightness			s3 to r3
HDMI Status			Indicates various information when connected with HDMI
			AV OUT terminal. (➜ below, Confirming HDMI information)
Quick OSD			(➜ page 11)

∫ Other Menu

To preset the settings

You can preset your favorite video/audio effects onto “User1”, “User2” and “User3”.

	Preparation
	Adjust the settings indicated below to your preference.
	(When “Auto” is selected, this is not available.)
	Audio settings:
	Night Sound Mode/H.Bass (➜ page 11)
	Advanced Surround/Multi Re-master (➜ page 12)
	Dialogue Enhancer (➜ page 18, Audio Menu)
	Sound Enhancement (➜ left)
AV Enhancer	Video settings:
	Picture Mode (➜ page 17, Picture Menu)
	1. Select “Save Settings” and press [ENTER].
	2. Press [34] to select the setting location (User1, User2 or
	User3) and press [ENTER].
	3. Follow the instructions on the menu screen and press
	[ENTER] last.
	To recall the settings (➜ page 11)
	To confirm the settings
	1. Press [34] to select “User1”, “User2” or “User3” and
	press [ENTER].
	2. Select “Save Settings” and press [ENTER] twice.
	To exit the screen, select “No” and press [ENTER].
Setup	(➜ page 20, Changing the player settings)
Play as DVD-Video	Select “Play as DVD-Video” to play [DVD-V]on DVD-Audio.
or
Play as DVD-Audio
Play as DVD-VR	Select “Play as Data Disc” to play [MP3] [JPEG] [MPEG4] or
Play as HighMAT	[DivX] on DVD-RAM that contain both [DVD-VR]and another
or	format (e.g. [JPEG]) or to play HighMAT discs without using the
Play as Data Disc	HighMAT function.

Using On-Screen Menus

∫Confirming HDMI information

HDMI Status----- HDMI is connected.		Connection status
HDMI Information		(➜ page 13, Changing soundtracks)
Audio Stream	PCM/Dolby Digital/DTS	Shows the maximum channel number
Max Channel	6ch	of the connected equipment.
Video Format	480p/576p/720p/1080i	(➜ page 18, Video Output Mode)
Colour Space	YCbCr(4:4:4)/YCbCr(4:2:2)/RGB	(➜ page 18, HDMI Colour Space)

≥All possible outputs are displayed.

≥The current output for “Audio Stream”, “Video Format” and “Colour Space” will be underlined.

≥When “Off” is selected in “Audio Output” (➜ page 21, “HDMI” tab) “– – –” will be displayed in “Audio Stream” and “Max Channel”.

RQT8519

19