Home Theater-Enjoying more powerful sound

Home Theater—Enjoying more powerful sound

This unit has built-in Dolby Digital and DTS decoders (➡ page 25).

You can enjoy the powerful movie theater and hall-like sound available with Dolby Digital and DTS by connecting an amplifier with 5.1-channel input terminals. You do not need to purchase separate Dolby Digital or DTS decoders.

Use analog connection to enjoy audio recorded with high sampling frequencies (over 48 kHz). Some of this material is copy-guarded and will be down-sampled if you use digital connection.

What you want to do

To enjoy 5.1-channel surround

sound

	How to do it	Reference
	How to do it	page
		page

[Analog\connection]	23 [A]
Connect to an amplifier with
5.1-channel audio input
terminals.


[Digital\connection]	23 [B]
Connect to an amplifier with
built-in decoder or a separate
decoder-amplifier combination.

	Settings	Reference
	Settings	page
		page

Speaker Setting	20
Select “Multi-channel”.

PCM Down Conversion	21
Dolby Digital
DTS Digital Surround
Change the settings to suit
the equipment you connect.

Make the speaker settings on	—
the amplifier or decoder.

Home Theater

To enjoy stereo or Dolby Pro Logic

[Analog\connection]	24 [C]
Connect to an analog amplifier
or system component.


[Digital\connection]	24 [D]
Connect to a digital amplifier or
system component.

PCM Down Conversion

Change the settings to suit the equipment you connect.

Dolby Digital and DTS Digital Surround

Select “PCM”.

Note

≥The equipment connections described are examples.

≥Peripheral equipment and optional cables sold separately unless otherwise indicated. ≥Before connection, turn off all equipment and read the appropriate operating instructions.

Recording to cassette tapes or digital recording equipment

∫Analog recording

You can record to a cassette deck or other recording equipment. Using analog connection means sound will be unaffected by the copy guards found on DVDs.

To make an analog recording

Connect the recording equipment with an audio cable (➡ [C] page 24).

∫Digital recording

You can record the digital signal directly to digital recording equip- ment.

When recording DVDs, the signals must be converted to a signal the recording equipment can handle. Use analog connection if the sig- nals are copy-guarded.

To make a digital recording

1.Connect the recording equipment with an optical digital audio cable (➡ [D] page 24).

2.When recording DVDs, make the following settings. ADVANCED SURROUND (V.S.S.): OFF (➡ page 11) PCM Down Conversion: Yes (➡ page 21)

Dolby Digital and DTS Digital Surround: PCM (➡ page 21)

RQT6270