Panasonic TC-L32U3 Auto channel setup ANT/Cable setup, Started First Time Setup, Select Start

Auto channel setup (ANT/Cable setup)

Select the connected Antenna in terminal

	Cable	Antenna	Not used		Not used: Go to
ANT/Cable setup			Step 3 of 6
			Cable In	select	(Label inputs)
			ANTENNA
			ANTENNA	OK
			Cable In
	OK
Select	RETURN

Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. Typical when a Cable/Satellite box is connected to a TV AV input.

Prevents accidental tuning to an unavailable signal, when Cable or Satellite box is used.

Getting

Select “Start”

Auto program Step 4 of 6

Skip: Go to

StartSkip

OK

Select RETURN

select

OK

(Label inputs)

Press to go back to the previous screen

Note

About broadcasting systems

Analog (NTSC): Conventional broadcasting

Digital (ATSC):

New programming that allows you to view more channels featuring high-quality video and sound

Start scanning the channels (Available channels are automatically set.)

Auto program			This process may take up to 20 minutes.
Progress
		8%	This step is not needed when a Cable or Satellite
Number of analog channels	10
Number of digital channels			box is connected to an AV input.
	0

Press RETURN to quit

RETURN

Complete the Auto program setup

Completion message is displayed when the Auto program scan is successfully completed.

Auto program	OK	If there is no available
Number of analog channels		channel, return to	-
	10	(ANT/ Cable setup).
Number of digital channels	0
Auto program completed.		“Not used” will be selected.

Press OK to continue.

OK

RETURN

Operation of the EXIT button during “First time setup”

Press the button once to display confirmation screen. Press again to close confirmation screen.

[EXIT confirmation screen]

Are you sure you want to exit the First Time Setup?		Yes	Exit “First time setup”
Yes	No	No	Return to the original screen.

started First Time Setup

13