Panasonic TC-L32U3, TC-L37U3, TC-L42U30 owner manual Setup Other function settings

Setup	Other function settings
Settings	Items	Item Description
Channel surf	All/Favorite/	Sets the mode to select the channel with the Channel up/down button.
mode	Digital only/	Favorite: Only channels registered as FAVORITE. (p. 16)
	Analog only
Language	English/	Selects the screen menu language.
	Español/
	Français
Clock		Adjusts the clock. (p. 14)

ANT/Cable setup See p. 28-29 for more detail.

Input labels	Selects the terminal and label of the external equipment.
(Display labels	Devices connected to external input terminals can be labeled for easier identification during the
of connected	input selection. (Input select (p. 19))
devices)	Terminals: HDMI 1-3/Comp./Video/PC
	Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/VCR/
	CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/
	OTHER

•You can also enter the label name directly. (Entering characters (p. 17)) VIERA Link settings See p. 24-25 for more detail.

ECO/energy	Power save	Reduces screen brightness to lower power consumption. Eye-friendly for
saving	(Standard/	viewing in a dark room.
	Saving)

No signal for 10 minutes (Stay on/ Power TV off)

To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION continue for more than 10 minutes.

•Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.

•“No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes”.

•The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

No activity for 3 hours

(Stay on/ Power TV off)

To conserve energy, the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours.

•Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while “PC inputs” is selected.

•“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 3 hours”.

•The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

Advanced setup Auto power on		Turns TV On automatically when the cable box or connected device is turned On.
	(No/Yes)	TV AC cord must be plugged into this device. TV turns on every time the power is restored.
	Image viewer	Slideshow/	Sets the playback type to play back SD cards automatically.
	auto play	Thumbnail/	Set later: “Image viewer settings” menu will be displayed repeatedly.
		Set later/Off	“Viewing photos with VIERA IMAGE VIEWER” (p. 20)
First time setup		Restarts the first time setup from “Language” setting. (p. 12)
About		Displays TV version and software license.
Reset to defaults		Performing Reset will clear all settings made with Setup, such as channel
		settings.
		• Password setting/entering (p. 17)

34