Iomega SBG1000 manual Setting Up a USB Driver in Windows XP

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Setting Up a USB Driver in Windows XP

Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted into the CD-ROM drive before you plug in the USB cable. A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed:

1Be sure “Install the software automatically” is selected.

2Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the following window is displayed:

Although your SBG model number may be different than in the images in this guide, the procedure is the same.

3Click Finish to complete the installation. Otherwise, be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is correctly inserted in the CD-ROM drive.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP” on page 57.

Home Print

X	108	SBG1000 Wireless Cable Modem Gateway User Guide
Exit